Page 6 For technical questions, please call 1-800-444-3353. Item 69782
Inspection, Testing, and Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY:
Remove Jack from trailer before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. Keep the Crank mechanism and
Inner Tube lightly greased.
3. AFTER USE, wipe external surfaces
of the tool with clean cloth.
SAFETY OPERATION INSPECTIONINSTALLATION
To Next Page
