Page 4 For technical questions, please call 1-888-866-5797. Item 60438
Specifications
Lift Capacity 1,000 lb.
Table Height
Minimum: 11"
Maximum: 34-1/2"
Table Dimensions 33" L x 20" W
Casters
5" D x 2" W,
(2 swivel with brakes, 2 fixed without brakes)
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to Parts Lists and Diagrams on page 8.
Assembly/Mounting
1. Place the Table Assembly on a flat surface which
is well lighted and safe for assembly operation.
2. Unfold the Handle (101) by pulling it up and
back into a vertical position. Be sure that
the Handle locks into position. The Handle
may be released and folded back down by
pressing down the Locking Bar (117).
3. Install the Pump Lever/Foot Pedal (139/140)
assembly into the Connecting Rod (133)
and secure in place using the Bolt (135).
Functions
Figure A
Handle (101)
Table (141)
Pump Lever/
Foot Pedal
(139/140)
Locking Bar (117)
Control Lever (102)
Locking Swivel Caster (118)
SAFETY OPERATION MAINTENANCESETUP
To Next Page
