Page 2 For technical questions, please call 1-888-866-5797. Item 61625
Specifications
Maximum Towing Capacity 5000 lb.
Coupler Ball Capacity 2″
Mounting Width Capacity 24″ to 43″
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
5. Maintain product labels and nameplates. These carry
important safety information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
Specific Safety Warnings
1. To avoid personal injury and/or property damage, do
not exceed the Tow Bar’s maximum towing capacity
of 5,000 pounds or the maximum tongue weight of
750 pounds. The towing capacity rating includes the
towed vehicle, additional towing equipment, etc. The
tongue weight capacity rating refers to the downward
force exerted on the Hitch Ball (not included) by
the towed vehicle including cargo on board.
2. Use a public, commercial scale to determine the
actual weight of the towed vehicle and its payload.
Do not exceed the weight capacity of any towing
equipment.
3. Tow at your own risk. Failure to heed and follow all
instructions and warnings can result in a vehicle
accident, personal injury and/or property damage.
Harbor Freight Tools cannot be held responsible
for any damage incurred while using the Tow Bar.
4. Make sure to read and fully understand
the tow vehicle manufacturer’s manual to
determine the proper towing capacities.
5. Make sure to read and fully understand the towed
vehicle manufacturer’s manual to determine the
proper additional towing equipment needed.
6. Before each use, always examine the Tow
Bar for loose bolts and nuts, structural cracks
and bends, and any other condition that may
affect its safe operation. Do not use the
Tow Bar even if minor damage appears.
7. Before each use, always attach Safety Chains (not
included) to the towing vehicle and towed vehicle.
Make sure the Safety Chains are attached to the
towing vehicle with the same length for each side.
Do not allow the Safety Chains to drag on the
ground. Inspect the Safety Chains before every tow.
8. Make sure to connect the electrical system from the
towing vehicle to the towed vehicle. Never tow a
vehicle without the running lights and brake lights
connected and in proper working condition.
9. Make sure the Coupler and the vehicle’s Hitch
Ball (not included) are of equal mating size
(2″) and are rated equal to or greater than the
weight of the towed vehicle and its payload.
10. Do not exceed 55 miles per hour when
using the Tow Bar. Excess speed is a
major cause of vehicular accidents.
To Next Page
Loading...
