SKU 99721 For technical questions, please call 1-800-444-3353. Page 6
there is no possibility of motorcycle
coming loose.
Turn knob on each Wheel Clamp (23) 11.
to secure motorcycle’s front wheel.
Return Ramp (2) to mounted position 12.
and secure with Wingnut (10) and
Press Plate (9).
Attach any needed markers and/or 13.
lights to carrier and motorcycle as
required by vehicle codes.
Unloading
Remove Wingnut (10), Press Plate 1.
(9) and Ramp (2).
Hook Ramp (2) to lip on LEFT side of 2.
platform. The Ramp must be secured
to Platform.
Release motorcycle’s front wheel 3.
from Wheel Clamps (23).
CAUTION! TO PREVENT INJURY:
Keep away from motorcycle parts
that may suddenly move as ten-
sion is released.
Have an assistant support motorcycle 4.
while carefully releasing tension on
all tie downs.
Remove both Wheel Lock Pins (8) 5.
and their R-pins (6).
6. Set motorcycle into Neutral gear.
With assistance, push motorcycle off
Ramp until rear wheel is halfway
across Platform (1). Have assistant
support motorcycle.
Replace front Wheel Lock Pin (8) and 7.
its R-pin (6).
Push motorcycle down Ramp and off 8.
Carrier.
Replace all Pins to their positions for 9.
storage.
Return Ramp (2) to mounted position 10.
and secure with Wingnut (10) and
Press Plate (9).
To Next Page
Loading...
