120 2420344510 E 11.11 AUS
Telescopic handlers
E
- Attachments
• To be used when lifting a load with the stabilisers lowered.
HTL 4010 - HTL 3210 (NA) load capacity chart for lowered stabilisers (Values given for information only)
5.9.5 - Operation instructions
Do not raise the boom unless the chassis is level (0 °).
Do not move a load without having secured it first.
Never use an attachment without first having made yourself familiar with the load capacity chart supplied
by HAULOTTE® on the handler (Load chart located on the left hand dashboard in the handler). Failure to
install the relevant HAULOTTE® supplied capacity chart could cause an accident resulting in death or
serious injury.
To Next Page
Loading...
Need help?
General
