Hauppauge WinTV-soloHD User Manual (English)

To Next Page

Click the RIGHT mouse button in the

live TV window to bring up the context

Double click the LEFT mouse button to

bring the TV full screen. Double click

again to exit full screen

Settings menu

Program Information

Now/Next

TV recordings

folder

EPG Program

Guide

Record button

for manual

recording

Snapshot

Close Captions

Audio

Volume and Mute

Program Pause

controls

• WinTV-soloHD or WinTV-dualHD DVB-T2/T/C receiver

• USB extension cable

• Portable TV antenna (on some models)

• Remote control

• WinTV v10 application for Windows (download with included Activation Code)

Installation of the WinTV-soloHD / WinTV-dualHD device

Locate a free USB 2.0/3.0 port (normally located at the side or back on the laptop

or desktop). Plug the WinTV-soloHD / WinTV-dualHD into the USB 2.0/3.0 port. The

USB extension cable can be used to position the WinTV-soloHD / WinTV-dualHD

away from your USB slot.

ote: we do not recommend connecting via a USB Hub.

WinTV-soloHD

WinTV-dualHD

Quick Installation Guide for Windows

click on Enter Activation code

and enter the activation code which

was printed on the WinTV v10

Download and Activation code

card. You do not need to enter the

dashes, and you can use upper or

lower case characters.

Step 4:

When the installation is complete,

you will find two new icons on your

Windows desktop: the WinTV

application icon and the WinTV

Advanced Options icon. The WinTV Advanced Options icon, when clicked, has

a number of useful WinTV v10 utilities such as to Empty EPG, Erase channel

database and others.

Double click on the

WinTV icon and the

WinTV application

will run. On the first

run of WinTV, it will

automatically go

through the TV source

selection and WinTV

will scan for channels.

Set the check mark

according to the

connected signal and

click Next.

Click Next to start the search.

Stations found are listed during the search.

When the search is complete, click Next to save the channels found.

ote: if you complete the channel scan and no channels are detected, you

can try the following: check your antenna connections, reposition your

antenna, add an antenna signal booster, or get a larger antenna. Information

on rescanning for TV channels can be found here:

www.hauppauge.com/rescan

Using the WinTV v10 application

ote: Please disable your antivirus software for the duration of the

software installation. We find that sometimes antivirus apps block the

temporary folders needed for the installation of WinTV

ote: An Internet connection is required for download and software

activation.

You will find the website and directions on the WinTV v10 Download and

Activation code card along with the Activation code for WinTV v10.

The WinTV v10 download can be found here:

www.hauppauge.com/wint10

Step 1:

Download the WinTV v10 installer by clicking the download button. The WinTV v10

Installer is normally saved in your

Download folder

Step 2:

Run wintv10setup from the Download

folder on your PC. Halfway through

the installation, a message will pop up

asking for you to enter the Activation

Code.

Step 3:

At the Activation required screen,

Installing the WinTV v10 application for Windows

Contents of the package

ote: the WinTV-soloHD / WinTV-dualHD will work with both USB 2.0 and

USB 3.0 ports.

Digital Terrestrial TV

The WinTV-soloHD / dualHD can receive DVB-T and DVB-T2 broadcasts from an

antenna.

Plug an antenna for DVB-T2 (FreeviewHD) or DVB-T (Freeview) TV reception into

the TV connector on WinTV-soloHD / WinTV-dualHD.

ote: When using FreeviewHD DVB-T2, it is recommended to connect

to a roof top aerial during the first time installation. This will provide

better signal quality then a portable antenna.

Cable TV

On a cable TV feed, the WinTV-soloHD / dualHD can receive digital TV and radio

programs (DVB-C).

Connect the TV output on the cable TV socket to the TV input on the WinTV stick,

using a high quality coax cable (not supplied).

Cable TV / Antenna

connector

Signal

indicator

USB 2.0/3.0

connector

receiver

Need help?

Do you have a question about the Hauppauge WinTV-soloHD and is the answer not in the manual?

Hauppauge WinTV-soloHD Specifications

General

Internal	No
TV tuner type	DVB-C, DVB-T
Analog signal format system	-
S-Video inputs quantity	0
TV antenna ports quantity (75 Ohm)	1
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64
Minimum processor	3.0 GHz Single Core or 2.0 GHz Multi-Core
Product color	Black
Electronic Program Guide (EPG)	Yes
Antenna connector type	DVB-T