How to fix a Haus & Luft HL-KP-20 that does not work?
If your Haus & Luft Air Conditioner isn't working, first ensure it's properly plugged into the mains and turned on. If the 'FL' indicator is lit, drain the condensate. Also, the air conditioner should be operated between 7°C and 35°C. Finally, make sure the room temperature isn't below the cooling temperature setting; if it is, adjust the temperature setting accordingly.
What to do if the compressor does not work on Haus & Luft HL-KP-20 Air Conditioner?
If your Haus & Luft Air Conditioner's compressor isn't working, it might be due to the automatic overheating protection feature. Wait 3 minutes to allow the compressor to cool down, and then restart the appliance.
How to improve cooling performance of Haus & Luft Air Conditioner?
If your Haus & Luft Air Conditioner isn't cooling well, check if the air inlet or outlet is blocked. If there's an obstruction, remove it to improve cooling performance.
Why is my Haus & Luft Air Conditioner making a loud noise?
If your Haus & Luft Air Conditioner is making a lot of noise, it might not be standing on a level floor. Try moving it to a level surface, as this may reduce the noise.
What to do if Haus & Luft HL-KP-20 displays E1 error code?
If your Haus & Luft Air Conditioner displays an E1 error code, turn off the appliance, wait for it to cool down, and then turn it on again. If the error persists, contact the service.
What to do if Haus & Luft HL-KP-20 displays E2 error code?
If your Haus & Luft Air Conditioner displays an E2 error code, wait until the room temperature is within the normal range. If the error persists, contact the service.
Essential safety instructions for operating the appliance, covering general usage and handling.
Precautions for operating and servicing appliances with R290 flammable refrigerant.
Guidelines for safe servicing, repair, leak detection, and component checks.
Explanation of warning and caution symbols used in the manual.
Details the physical components of the air conditioner unit.
Description of buttons, indicators, and controls on the appliance and its remote.
Basic guidelines for unpacking, placement, and initial setup.
Instructions for assembling the appliance and connecting the hot air exhaust duct.
Methods for mounting the exhaust duct kit in sliding and hinged windows.
How to start the unit and select cooling, dehumidifying, and fan modes.
Using fan speed, delayed start/stop, and oscillation functions.
Procedure for emptying the internal water reservoir when it is full.
Instructions for connecting a drain hose for continuous water removal.
Steps for cleaning the housing and maintaining the air intake filters.
Guidance on preparing the appliance for winter storage.
Common issues, their causes, and suggested solutions for the air conditioner.
Includes schematic diagram, power cord length, noise level, and energy efficiency.
Instructions for environmentally responsible disposal of the appliance.
General| Type | Monobloc mobile air conditioner |
|---|---|
| Hose length | 1.5 m |
| Noise level | 63.5 dB |
| Number of speeds | 3 |
| Water tank capacity | - L |
| Airflow (high speed) | 380 m³/h |
| Refrigerating medium | R290 |
| Dehumidifier function | Yes |
| Cooling capacity (max) | - BTU/h |
| Air conditioner functions | Cooling, Dehumidifying, Ventilating |
| Cooling capacity (nominal) | 12000 BTU/h |
| Operating temperature (T-T) | 7 - 35 °C |
| Refrigerating medium weight | 265 g |
| Suitable for room area up to | 42 m² |
| Cooling capacity in watts (max) | - W |
| Cooling capacity in watts (nominal) | 1350 W |
| Cooling energy efficiency (EER, W/W) | 2.6 |
| Heating energy efficiency (COP, W/W) | - |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A+++ to D |
| Energy efficiency class (cooling) | A |
| Energy efficiency class (heating) | No |
| Annual energy consumption (cooling) | 3.5 kWh |
| Hourly energy consumption (cooling) | 1.4 kWh |
| Hourly energy consumption (heating) | - kWh |
| Remote control battery type | AAA |
| Remote control battery voltage | 1.5 V |
| Number of remote control batteries | 2 |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 360 mm |
| Height | 750 mm |
| Weight | 29500 g |
| Package weight | 33500 g |
To Next Page
