EasyManua.ls Logo

Hausmann Powermatic 1440 Series User Manual

Hausmann Powermatic 1440 Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Questions and Answers:

Hausmann Powermatic 1440 Series Specifications

General IconGeneral
BrandHausmann
ModelPowermatic 1440 Series
CategoryMedical Equipment
LanguageEnglish

Summary

Base Assembly Placement

Base Assembly Spacing Guidelines

Provides guidelines for the distance between base assemblies based on the size of the mat platform.

Pre-Test Motors and Control Box

Control Box Pre-Test Procedure

Instructions for testing the control box and motors using the UP/DOWN buttons before full assembly.

Attaching Upholstered Top to Base Assembly

Attaching Control Box and Securing Wires

Securing Actuator Wires

Placing and Securing Shelf "C"

Leveling Base Plates

Leveling Procedure

Instructions on using a level and adjusting base plate levelers to ensure the unit is level.

Control Box Connections

Actuator Plug Insertion and Locking

Detailed instructions on correctly inserting and locking actuator plugs into the control box ports.

Power and Foot Switch Plug Insertion

Guidance on inserting power and foot switch plugs into the control box.

Troubleshooting Common Issues

No Power to Control Box

Steps to check for power issues, including checking the green light and wall outlet.

System Not Responding

Verifies actuator plug seating, foot control clicking, and potential faulty components.

Recommended Cleaning and Maintenance

Cleaning Procedure

Unplug unit before cleaning; use approved germicidal solution and a wet cloth for rinsing.

Connecting Plugs to Control Box

Attaching Power and Foot Switch Plugs

Ensures correct position for power and foot switch plugs to prevent control unit damage.

Detaching Power and Foot Switch Plugs

Procedure for detaching plugs using a special plastic wrench to separate brackets.

Attaching and Detaching Actuator Plugs

Instructions for inserting and locking actuator plugs using O-rings and a 30° turn.

Related product manuals