To Next PageTo Next Page
Need help?Do you have a question about the Hausmann 1396 and is the answer not in the manual?
Electrical linear drives in no-clearance aluminum guide tubes with anodized surfaces.
Micro-processor control unit for lifting columns, double insulated for safety.
System operation via LD-011 Hand Control Switch on support post.
Intermittent use recommended (10% ON, 30s ON/270s OFF) with thermal overload protection.
Provides push force, stroke, speed, voltage, and component certifications.
Maximum load capacity is 400 lbs; motors adjust height, not lift patient.
Instructions for initial setup, including platform placement and power connection.
Procedure for setting and recalling up to four different handrail height positions.
Methods (Variant A/B) to move handrails to pre-set memorized heights.
Periodic checks of cables and cleaning with a damp cloth.
Defines responsibility for proper installation, maintenance, and use.
Diagram showing connections from lift columns to control box.
Labeled diagram of the parallel bars with key components.
View of the wiring chase underneath the wood platform.
Close-up of the control panel with LED display and buttons.
View of the LD-014 control box interior with ports and wiring.
Explanation and illustration of adjusting the handrail width.
Details on the wood platform's dowel holes for ladder steps.
Information on included ladder steps and the balance beam with dowel pins.
General| Brand | Hausmann |
|---|---|
| Model | 1396 |
| Category | Medical Equipment |
| Language | English |
