DETAIL OF WIDTH ADJUSTMENT KNOB OF STAINLESS STEEL HANDRAIL
9
↥2004 Hausmann Industries, Inc.
11/3/04
Width Control Knob
Mounting plate for
width control knob
To adjust width, turn both width control knobs counter-clockwise until "loose", then move handrail "in" or
"out" as needed, and retighten friction control knobs to lock-in width position of handrails. Width adjusts
from 15" to 28" wide. Each side should be adjusted at the same time. See image below: Adjust side A-B,
then adjust side B-C.
1
/4" x
1
/20
Set Screw
1
/4" x
1
/20
Set Screw
A
B
C
D
To Next Page
Loading...
