Description of symbols:
Description of symbols:
No-load speed.
n
0
Voltage
V~
Milliamps/Amps/Amp-hours
mA
A/Ah
Please read all of the safety and operating instructions carefully before using this tool. Please
pay particular attention to all sections of this User Guide that carry warning symbols and
notices.
Observe caution and safety notes!
DC (current and voltage type)
Drill setting (torque Preselect )
Protect electrical power tool from moisture!
Check that the device, mains lead and plug are in good condition!
Safety class II
Dispose packaging and appliance in an environmentally-friendly way!
SAFETY SYMBOLS
12
To Next Page
Loading...
General