⚠ Warning
Auto reversing assistance is intended only as a helpful tool, and cannot replace the driver’s
appreciation of the situation. When reversing the driver must observe their surroundings and take
note of reversing alerts; if something unexpected happens they should take control to ensure safety.
How to use
1. Touch the 【 Reversing tracking 】 button on the around view interface to activate the auto
reversing assistance.
When the auto reversing assistance is active, automatic reversing can be completed via the
prompts on the multimedia screen.
⚠ Caution
In order to ensure the parking safety, the driver needs to monitor the surrounding environment of
the vehicle at any time, to brake and take over the vehicle in time when there is a collision risk .
Precautions
The system will stop and clear the recorded track under the following circumstances:
If the vehicle speed is over 30 km/h.
If the vehicle shuts down abnormally.
If the steering wheel is turned excessively (about 450°).
If the vehicle diverges from the recorded track by more than one meter.
While reversing, the following situations might cause the auto reversing assistance to be interrupted
or stop working:
Touching the [Reversing tracking] button.
Interfering with the gear, the steering wheel, the parking brake, or the accelerator pedal.
Unfastening the driver’s seat belt.
Opening a door (including the tailgate).
Fold the rearview mirror.
If the system detects that the vehicle is unable to continue.
If an obstruction is detected on the route.
Notice
After interruption and exiting due to non-system failure, turn on the auto reversing assistance
function again, and the system can control the vehicle to complete reversing along the remaining
path.
To Next Page
Loading...
