【Auto steering】
You can switch the turn signal on intelligently function on or off.
When the function is switched on and the vehicle is in D gear, the panoramic view is automatically
turned on when you activate the indicators or the steering wheel is turned to a certain angle. When
the steering wheel returns to its original position, the indicator is canceled or the vehicle reaches
a set speed, the panoramic view is automatically turned off.
【Exit AVM speed】
The speed at which the AVM is turned off can be set.
When the speed of the vehicle exceeds a set value, the AVM will be turned off automatically.
【Road calibration】
During the using of vehicle, when the camera position changes due to bumping of vehicles or
aging of parts, the image may be misplaced, blurred and distorted. At this time, the image effect
can be optimized through the road calibration setting.
Please refer to the prompt information on the multimedia display screen for the specific
calibration methods and requirements.
【Restore to factory calibration】
After re-calibrating the road, you can restore the factory calibration by pressing the “restore
factory setting”.
【Trigger panoramic】
You can touch the trigger panoramic button to enable the panoramic view.
To Next Page
Loading...
