EasyManua.ls Logo

Havit H1108 - Usage and Safety Precautions; Water and Perfume Addition; Water Cup Installation and Removal

Havit H1108
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
As the follow picture 1 the Spray arm can adjust right and left 150 degrees.
As the follow picture 2 the shower nozzle can adjust 360 degrees.
Pay attention not to adjust too hard.
3.add water to the host machine:
Please lift up the cover, put water to the water cup.
Water level should not beyond the between the water scale
line (pictured at right)
5Add perfume essence oil
You should unplug the essential oil base, add perfume
essence oil with dropper into the cotton (one to two drops is
OK). (Picture at right)
You can change cotton with a tweezer.
6Install and remove water cup:
Please turn down the power of the host machine before removing water cup.
After the water cooling, Pull hot plate operative ring by one hand, and hold the water cup
handle by other hand, then pull out the
water cup in horizontal level
Please turn down the power of the host
machine before assembling the water cup,
push down the hot plate operative ring by
one hand, and hold the water cup handle by
other hand, then push the water cup back to
the hot machine.
Control panel operation instruction
1 Plug the power plug.