www.hawkeyeelectronics.com
Thank you for purchasing a HawkEye
®
product,
and welcome to the innovations of NorCross
Marine Products, Inc. To ensure safety and
many years of trouble-free operation of your
product, please read this manual carefully before using this product.
INTRODUCTION TO DEPTHTRAX
®
INTELLIGENT SONAR
DepthTrax
®
Intelligent Sonar uses SONAR sound waves to
detect depth and define bottom contour, composition and
structure. Using specialized microprocessors, these sound
waves are generated by the DepthTrax
®
display and sent to
the DepthTrax
®
Sonar Sensor (Transducer). The sonar
sensor, acting first as a “speaker”, emits these sound waves
as a series of pulses. Then, microseconds later, the sonar
sensor switches to a “microphone” and listens for the return of
the pulses as they bounce off of objects in the water column
(referred to as “echoes”). The “echoes” are sent back to the
display where, using proprietary algorithms in the DepthTrax
®
software, they are analyzed for location, size, and
composition. These signals are then arranged by
DepthTrax’s
®
Human Interface Software, filtered, and only the
depth readings are shown on the display.
SAFETY INFORMATION:
• Read this instruction manual carefully before attempting to install or operate this
device.
• Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this
device.
• Only qualified personnel should perform repairs or servicing not covered in this
manual.
• The LCD used in the product is made of glass. Therefore, it can break when the
product is dropped or impacted.
• Keep this product away from heat sources such as radiators, heaters, stoves and
other heat generating sources.
• Do not store in extreme temperatures above 150° F (65° C).
• Shade the LCD during storage. Do not expose LCD to direct sunlight for extended
periods of time.
NOTES, NOTICES, AND CAUTIONS
To Next Page
Need help?
General