5
WINDOWS 95/98/ME/NT/2000/XP
1) POWER ON: After you have correctly connected your print
server to your PC and router, please power on all units.
2) Before the installation, please verify that your network
protocols are installed on your PC (TCP/IP, IPX and/or
NetBEUI). If they are not installed, please consult your
operating system’s manual for instructions on how to do so.
3) INSTALL the Administrator Installation Program: To
install your Print Server administration software, please
follow the directions listed below.
1. Insert the Windows 95/98/ME/NT/2000/XP Setup CD into
your CD-ROM.
(Windows should execute the Autorun.exe program automatically.
If not, run Autorun.exe manually from your CD-ROM drive’s root
directory.)
To Next Page
Loading...
Need help?
General
