EasyManuals Logo

Hawking HWR54G User Manual

Hawking HWR54G
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Wireless Router User Guide
70
PC Database
The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). It elimi-
nates the need to enter IP addresses. Also, you do not need to use fixed IP addresses on your
LAN.
PC Database Screen
An example PC Database screen is shown below.
Figure 42: PC Database
PCs which are "DHCP Clients" are automatically added to the database, and updated as
required.
By default, non-Server versions of Windows act as "DHCP Clients"; this setting is called
"Obtain an IP Address automatically".
The Wireless Router uses the "Hardware Address" to identify each PC, not the name or IP
address. The "Hardware Address" can only change if you change the PC's network card or
adapter.
This system means you do NOT need to use Fixed (static) IP addresses on your LAN.
However, you can add PCs using Fixed (static) IP Addresses to the PC database if re-
quired.

Table of Contents

Other manuals for Hawking HWR54G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hawking HWR54G and is the answer not in the manual?

Hawking HWR54G Specifications

General IconGeneral
Wireless Standard802.11g
Frequency Band2.4 GHz
Maximum Wireless Speed54 Mbps
SecurityWEP, WPA, WPA2
Antenna2 x External
Dimensions6.3 x 4.72 x 1.57 inches
Connectivity TechnologyWireless
Wireless Protocol802.11b/g
Antenna Gain2 dBi
Ports1 x WAN, 4 x LAN
StandardsIEEE 802.11b/g
Wireless Data Rates54/48/36/24/18/12/9/6 Mbps (802.11g), 11/5.5/2/1 Mbps (802.11b)