The Hawksmoor 36V (2 x 18V) 4 in 1 Brushless Cordless Multi Tool, SKU 69946, is a versatile battery-powered electrical machinery designed for private domestic use. It combines four different functions: brush cutter, grass trimmer, pole hedge trimmer, and pruner, allowing users to tackle various gardening tasks with a single tool.
Function Description:
The multi-tool's primary function is to provide a comprehensive solution for garden maintenance. Depending on the attached accessory, it can perform specific tasks:
- Brush Cutter: When equipped with the cutter blade, the product is designed to cut heavier weeds, brush, and similar vegetation with a thickness of over 20mm.
- Grass Trimmer: With the line spool attached, it is intended for cutting smaller types of weed, lawn grass, and similar soft vegetation. It is not suitable for unusually thick, dry, or wet grass, or for shredding leaves.
- Pole Hedge Trimmer: Using the hedge trimmer blade, the tool is designed for trimming wide and high hedges, bushes, and shrubs.
- Pruner: With the saw chain/guide bar assembly, it is intended for cutting limbs with a maximum thickness of 180mm. Only the guide bar/saw chain combination specified in the instructions should be used.
The product is not intended for cutting other materials like plastic, stone, metal, or wood containing foreign objects, nor for commercial trade use.
Important Technical Specifications:
The multi-tool operates on a 36V (2x18V) d.c./4.0Ah Lithium-ion battery system.
- Model: SLEF1000
- Nominal voltage of product with battery: 36 (2x18)V d.c./4.0Ah Li-ion
- No Load Speed: 8500/min
- Battery type: Lithium-ion
- Battery Model: B0P-SP06-18ZK
- Charger Model: B0Q-SP07-2040ZB
- Charger rating input: 220-240V AC, 50/60Hz 120W
- Charger rating output: 21V d.c. 4A
- Charging time (approx.): 120 mins
- Net weight (without cutting attachment and with battery): approx. 4.4kg
Brush Cutter Specifications:
- Blade Size: 3 teeth, Ø230X Ø25.4mm
- No load speed: 6500 /min
- Sound pressure level LpA,av: 82.0dB(A)
- Uncertainty: 3dB(A)
- Sound power level LWA,m: 100.9dB(A)
- Uncertainty: 2.16dB(A)
- Guaranteed sound power level LWA: 103 dB(A)
- Hand arm vibration:
- Front handle ah: 4.470 m/s²
- Rear handle ah: 3.720 m/s²
- Uncertainty: 1.5 m/s²
Grass Trimmer Specifications:
- Line spool diameter: Ø 2.0mm
- Max. cutting width: 360 mm
- No load speed: 6000 /min
- Sound pressure level LpA,av: 78dB(A)
- Uncertainty: 3 dB(A)
- Sound power level LWA,m: 94.5dB(A)
- Uncertainty: 1.88 dB(A)
- Guaranteed sound power level LWA: 96 dB(A)
- Hand arm vibration:
- Left handle ah: 4.320 m/s²
- Right handle ah: 3.690 m/s²
- Uncertainty: 1.5 m/s²
Hedge Trimmer Specifications:
- Max. cutting length: 395 mm
- Max. cutting capacity: 24 mm
- No-load speed: 1200/min
- Adjustable cutting angle range: -90° — +60°
- Sound pressure level LpA,av: 80.3 dB(A)
- Uncertainty: 3 dB(A)
- Sound power level LWA,av: 97.7 dB(A)
- Uncertainty: 1.97 dB(A)
- Guaranteed sound power level LWA: 103 dB(A)
- Hand arm vibration:
- Front handle ah: 4.470 m/s²
- Rear handle ah: 3.720 m/s²
- Uncertainty: 1.5 m/s²
Pruner Specifications:
- Chain oil tank: 150 ml
- Saw chain speed: 13 m/s
- Max. cutting length: 180 mm
- Guide bar length: 203 mm
- Guide bar type: Oregon 080SDEA041(552912)
- Saw chain type: Oregon 91PJ033X
- Chain pitch: 9.525 mm (3/8")
- Chain gauge (thickness of drive links): 1.27 mm (0.050")
- Drive sprocket (teeth and pitch): 7 teeth x 9.525 mm(3/8")
- Sound pressure level LpA,av: 84.1 dB(A)
- Uncertainty: 3 dB(A)
- Sound power level LWA,av: 100.6 dB(A)
- Uncertainty: 2.38 dB(A)
- Guaranteed sound power level LWA: 103 dB(A)
- Hand arm vibration:
- Front handle ah: 4.470 m/s²
- Rear handle ah: 3.720 m/s²
- Uncertainty: 1.5 m/s²
Usage Features:
- Auxiliary Handle Assembly: The auxiliary handle (A7) and step guard (A8) can be adjusted for optimal positioning and secured with screws and hex keys.
- Attachment System: The product allows for easy assembly and interchangeability of different cutting heads (brush cutter, grass trimmer, hedge trimmer, pruner) to suit various applications.
- Battery System: It uses two 18V Lithium-ion batteries. The battery pack comes partly charged and should be fully charged before first use (approx. 60 minutes). Battery capacity can be checked via an LED indicator. Charging should occur between 5°C and 45°C, and the charger should rest for 15 minutes between continuous charging sessions.
- Shoulder Strap (A12): A shoulder strap is provided to help carry the product, ensuring the securing clip is at the right hip and the cutting head is parallel to the surface being cut. A quick-release mechanism allows for emergency detachment.
- Operation: To start, press the lock-off button (A4) and then the variable speed trigger (A3). Releasing the trigger stops the motor.
- Safety Features: Includes warnings for kickback, thrown objects, and the importance of wearing personal protective equipment (ear, eye, face protection, safety helmet, gloves, footwear, protective clothing). It also warns against using the unit in humid conditions or near overhead power lines.
- Brush Cutter Operation: Avoid cutting material thicker than 20mm. Be aware of kickback and maintain a firm grip.
- Grass Trimmer Operation: Trim longer grass in stages. The trimmer head features a bump feed mechanism (B12) for releasing more line. A line cutter (B9) on the trimming guard (B8) automatically cuts the line to the necessary length.
- Hedge Trimmer Operation: The trimmer head angle can be adjusted (-90° to +60°) using locking levers (C3). Cut both sides from bottom to top, then the top. A slight tilt downwards is recommended for optimal performance.
- Pruner Operation: The pruner head angle can be adjusted using a locking lever (D8). Always hold the product firmly with both hands and use the shoulder strap. Maintain a cutting angle of not more than 60° from the horizontal. Be aware of kickback and ensure the chain is sharp and tensioned correctly.
- Chain Lubrication: The pruner has an automatic oiling system. The chain oil tank (D1) must be filled with environmentally-friendly chain oil before use. Approximately 5mm of space should be left in the tank for expansion. Regular checks of oil delivery are essential.
- Cutting Branches: Thin branches can be cut with a single cut. For thick branches, a three-cut method is recommended to prevent slivering and buckling: an undercut, a top cut further out, and a final clean cut to the stump.
Maintenance Features:
- General Cleaning: Stop the motor, wait for moving parts to stop, and remove battery packs before cleaning. Use a damp cloth with mild soap and a brush for hard-to-reach areas. Clean air vents after each use. Remove stubborn dirt with high-pressure air (max. 3 bar).
- Inspection: Regularly inspect for worn or damaged parts. Replace damaged parts or contact an authorized service center.
- Brush Cutter Blade: Keep the cutting blade (B5) clean, free of debris, and sharp. Replace worn or damaged blades.
- Trimmer Head: Keep the trimmer head (B10) clean. Replace the spool (B10) or refill the trimming line (B11) with a new 6m long, 2.0mm diameter line.
- Hedge Trimmer Blade: Keep the hedging blade (C1) clean and sharp. Lubricate the blade with light machine oil after each use.
- Guide Bar and Saw Chain:
- Disassemble the guide bar and saw chain for maintenance.
- Check the oiling port (D14) for clogging and clean with a soft wire.
- Check the drive sprocket (D10) for wear or damage.
- Clear residue from the guide bar rails (D7) to ensure proper lubrication.
- Check the guide bar 'rail' for wear using a ruler; replace if worn.
- Turn the guide bar 180° periodically for even wear.
- Check the saw chain (D6) for wear and damage; replace if necessary.
- Saw Chain Sharpening: Only trained and experienced users should sharpen the saw chain. Use proper tools and follow sharpening instructions, considering file angle, cutting angle, file position, diameter of round file, and file depth. Check depth gauge height every 5 sharpenings.
- Storage: Remove battery packs, clean the product, and store it in a dry, frost-free, well-ventilated place inaccessible to children (ideal temperature 10-30°C). Use original packaging or a protective cloth.
- Transportation: Remove battery packs, attach transportation guards for cutting means, carry by handles, and protect from heavy impact or vibrations. Secure the product to prevent slipping or falling over.
Need help?
General
To Next Page