Hay J77 - J104 Chair Assembly; Mounting the Legs; J110 Chair Assembly

Seat (A) x 1 Spacer (D) x 2Leg 40cm
(B) x 2
By POUL M. VOLTHER
MOUNTING THE LEGS
Mount the shortest legs (B) at the rear of the seat (A), and the longest legs (C) at the front of
the seat (A), and tighten them firmly. Make sure to mount the legs using the same angle as the
bushing. Use a spacer (C) between the seat and the leg in case the chair tilts.
(See >NOTE< on last page).
Leg 43cm
(C) x 2
c
cB
B
Remember to retighten the legs regularly.
Seat (A) x 1 Spacer (C) x 2Leg (B) x 4
By JØRGEN BÆKMARK
MOUNTING THE LEGS
Mount the legs (B) using the same angle as the bushing, and tighten them firmly.
Use a spacer (C) between the seat and the leg in case the chair tilts.
(See >NOTE< on last page).
Remember to retighten the legs regularly.
J104 J110