What to do if Hayter Green Battery Charger is not working?
If your Hayter Battery Charger isn't working, there could be a couple of reasons. First, the charger might be too hot or too cold. Try unplugging it and moving it to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F). Alternatively, the outlet you're using might not be working. In that case, you should contact a licensed electrician to repair the outlet.
Why does my Hayter Green LED indicator light stay red?
If the LED indicator light on your Hayter Battery Charger is red, it means the charger and/or battery pack is either too hot or too cold. You should unplug the charger and move both the charger and battery pack to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F).
What to do if Hayter Battery Charger LED indicator light is blinking red?
If the LED indicator light on your Hayter Battery Charger is blinking red, it indicates a communication error between the battery pack and the charger, or a weak battery pack. Try these steps: 1. Remove the battery pack from the charger. 2. Unplug the charger and wait 10 seconds. 3. Plug the charger back in and reattach the battery pack. If it continues to blink after two attempts, or the battery pack is weak, dispose of the battery pack at a battery recycling facility.
What to do if Hayter tool does not run continuously?
If your Hayter tool isn't running or isn't running continuously, check for these potential causes: * Moisture on the battery pack leads: Allow the battery pack to dry or wipe it dry. * Improper battery installation: Remove the battery and then replace it, ensuring it's fully installed and latched correctly.
Indicators for battery charging status, fully charged, temperature range, and charging fault.
Decals and symbols for the CODE120A lithium-ion battery charger.
Decals and symbols for the CODE121A lithium-ion battery rapid charger.
Decals and symbols for Hayter Green Series lithium-ion battery packs.
Explanation of common safety symbols like 'Read Manual', 'Recycle', 'Indoor Use'.
Instructions for securely mounting the battery charger indoors near a power outlet.
Details on the specifications and features of the Hayter battery chargers.
Details on Hayter Green Series lithium-ion battery pack capacities and ratings.
Recommended temperature ranges for charging, using, and storing battery packs and chargers.
Step-by-step instructions for safely charging the lithium-ion battery pack.
Guidelines for storing the tool, battery pack, and charger in suitable conditions.
Instructions on covering terminals and responsible disposal of battery packs.
Resolving issues with battery charge loss, charger not working, and LED indicator errors.
Troubleshooting tool operation, battery removal, and terminal contact problems.
How Hayter collects, uses, retains, and shares your personal information.
Commitment to data security and rights to access, correct, or restrict data processing.
General| Brand | Hayter |
|---|---|
| Model | Green Series |
| Category | Battery Charger |
| Language | English |
To Next Page