Need help?Do you have a question about the Hayward Pool Products HP40A and is the answer not in the manual?
Presents technical specifications and performance metrics for the swimming pool heat pump unit.
Details the physical dimensions of the heat pump units in both millimeters and inches.
Provides a visual diagram illustrating the typical installation setup for the heat pump unit.
Discusses optimal outdoor placement for the heat pump, considering air flow and proximity.
Recommends the ideal distance for installing the heat pump relative to the swimming pool.
Explains the specific plumbing requirements and connection details for the heat pump.
Outlines the essential steps and precautions for safely connecting the heat pump electrically.
Guides the user through the procedure for starting the unit for the first time after installation.
Details the process for adjusting the bypass valve to achieve the correct water flow and temperature difference.
Introduces the electronic control panel and its basic functions.
Explains how to set the internal clock on the control panel.
Describes how to program the unit's start and stop times using the timer.
Details how to select between heating, cooling, or automatic operating modes.
Covers adjusting and viewing the target water temperature for the pool.
Explains how to lock and unlock the control panel's touch screen interface.
Describes how to switch the temperature display between Celsius and Fahrenheit.
Lists various parameters, their default values, and adjustability.
Provides guidelines for routine maintenance to ensure optimal performance and longevity.
Lists common malfunctions, their causes, and recommended solutions.
Details the necessary steps for preparing the unit for winter storage to prevent damage.
Illustrates the Printed Circuit Board (PCB) and its connection points.
Presents the electrical wiring diagram specific to the HP40A model.
Presents the electrical wiring diagram specific to the HP50A model.
Presents the electrical wiring diagram specific to the HP80A model.
Shows an exploded view of the HP40A model with numbered parts.
Lists part codes, names, and numbers for the HP40A model.
Shows an exploded view of the HP50A model with numbered parts.
Lists part codes, names, and numbers for the HP50A model.
Shows an exploded view of the HP80A model with numbered parts.
Lists part codes, names, and numbers for the HP80A model.
Details the manufacturer's limited warranty terms and conditions for the heat pump.
General| Brand | Hayward Pool Products |
|---|---|
| Model | HP40A |
| Type | Heat Pump |
| Heating Capacity | 40, 000 BTU/h |
| Phase | Single |
| Weight | 220 lbs |
| Fuel Type | Electric |
| Minimum Flow Rate | 20 GPM |
| Maximum Working Pressure | 50 PSI |
| Inlet/Outlet Connection | 2 inch |
To Next Page
