Do you have a question about the Hayward Pool Products PRO S310S and is the answer not in the manual?
Details hazards like hair, limb, body suction, evisceration, and mechanical entrapment.
Explains how filter sand traps dirt particles and water is recirculated.
Covers positioning, valve assembly, securing the filter tank, and loading sand media.
Steps for priming the pump, backwashing, rinsing, and setting the filter to operate.
Explains the functions of FILTER, BACKWASH, RINSE, WASTE, RECIRCULATE, and CLOSED modes.
Guidance on contacting authorized dealers or service centers for repairs.
Addresses problems like low water flow, short filter cycles, and unclear pool water.
Provides recommended pH, alkalinity, and chlorine levels for pool water.
Outlines the warranty period, terms, conditions, and how to obtain service.
| Type | Sand Filter |
|---|---|
| Flow Rate | 50 GPM |
| Sand Capacity | 300 lbs |
| Turnover (8 Hours) | 24, 000 gallons |
| Operating Pressure | 50 PSI |
| Valve Included | Yes |
| Valve Type | Multiport |
| Pool Capacity | 30, 000 gallons |
| Tank Diameter | 30" |
| Connection Size | 1.5 inches |
| Inlet/Outlet Connection | 1.5 inches |
Loading...