Hayward Pool Products S210S - User Manual

SAVE THIS INSTRUCTION MANUAL
OWNER’S MANUAL
INSTALLATION, OPERATION & PARTS
MODELS S210S, S244S
PRO™ SERIES HIGH RATE SAND FILTERS
Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause severe
injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the
following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property damage and if
ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property damage
and if ignored presents a potential hazard. It can also make consumers aware of actions that are unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Use only High Rate Sand No. 20 Silica Sand (.45mm - .55mm)
HAYWARD POOL PRODUCTS, INC.
620 Division Street Elizabeth, NJ 07207 Tel: 908-351-5400
WWW.HAYWARDPOOL.COM
IS210S-06
Rev B

Summary

General Safety Precautions

Safety Alert Symbol Identification

Identifies safety alert symbol and associated signal words (WARNING, CAUTION, NOTICE) for potential hazards and important instructions.

Hazard Warnings

Details warnings for severe injury/death from failure to follow instructions, including specific hazards like WARNING and CAUTION.

Suction Entrapment Hazards

Types of Entrapment Hazards

Describes specific entrapment risks: Hair, Limb, Body Suction, Evisceration/Disembowelment, and Mechanical.

Reducing Entrapment Risk

Provides guidelines for preventing entrapment: multiple outlets, spacing, flow rate, and component condition.

Specific Hazard Warnings

Addresses hazards from pressure test plugs, debris, component lifespan, and access by children.

Electrical and Pressure Safety

Covers electrical grounding, working with live power, and operating pressure limits (40 PSI).

How the Sand Filter Works

Installation Guide

Preparation and Component Attachment

Covers filter placement, tools, and connecting the control valve and pump.

Loading Filter Media

Details the process of loading sand media into the filter tank, including preparation steps.

Initial Filter Start-Up Procedure

Pre-Start Up Checks

Ensures correct sand amount, secure connections, and pump shut-off before valve changes.

Initial Filtration Cycles

Covers initial backwashing and rinsing to prepare the filter for operation.

Monitoring and Maintenance Triggers

Explains noting clean pressure and triggers for backwashing based on pressure rise.

Filter Control Valve Operation

Valve Position Descriptions

Explains FILTER, BACKWASH, RINSE, WASTE, RECIRCULATE, CLOSED, and VACUUMING functions.

Troubleshooting and Maintenance

Common Pool Problems

Provides solutions for low water flow, short filter cycles, and cloudy pool water.

Pool Water Chemistry

Offers guidelines for adjusting pH, alkalinity, chlorine, and stabilizer levels.

Hayward Pool Products S210S Specifications

General

Brand	Hayward Pool Products
Model	S210S
Category	Water Filtration Systems
Language	English