11
How To: Program Temperature Lock-Out (cont.)
Press the ‘MENU ICON’ button to toggle to the
‘POOL’ now that the ‘SPA’ is set.
Raise or lower the temperature displayed
using the minus or plus button.
To finalize, press the ‘MENU ICON’ button
until the heater goes back into ‘STANDBY’.
Step 6Step 5
Step 7
NOTE: The default Max temp set points are 90ºF (Pool) 104ºF (Spa).
When setting the max temp lock-out set point, the LEDs & display should flash rapidly.
To Next Page
Loading...
Need help?
General
