Remove cabinet top
Carefully lift up on the top of the heater cover and
disconnect the ribbon cable from the display, then
remove cabinet top.
Remove screws from both sides
Remove the one screw that holds the right side
electrical cover and remove cover.
Remove electrical cover
Step 3
16
Locate and remove the 4 screws from the right side
sheet metal and lift up to remove the sheet metal.
Remove right side sheet metal
Clean/Replace Burner
Turn the Power and the gas off to the unit. Remove
the 2 top screws on each side of the heater as
shown above.
Step 4
Step 1 Step 2
To Next Page
Loading...
Need help?
General
