Need help?Do you have a question about the Hayward OnCommand® and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | OnCommand® |
| Category | Home Automation |
| Language | English |
Controls manual operation of the pool filter pump, including speed settings.
Manually operates lights, auxiliary devices, and their respective relays.
Controls pool and spa valve selection and operation without spillover.
Puts the system into service or service-timed mode for maintenance.
Explains the use of keypad buttons for programming system functions.
Sets the desired temperature for the spa heater.
Sets the desired temperature for the pool heater.
Sets the desired temperature for the spa solar heating.
Sets the desired temperature for the pool solar heating.
Activates super chlorination for increased chlorine levels.
Sets the current day of the week and time for the system.
Sets the all-day timeclock for spa operation.
Sets weekend timeclock for spa operation.
Sets weekday timeclock for spa operation.
Selects pool only, spa only, or pool and spa operation.
Sets filter pump to 1-speed, 2-speed, or variable speed.
Enables or disables freeze protection for the system.
Sets the temperature threshold for freeze protection.
Enables or disables the heater and sets operating parameters.
Enables heater cooldown period after shutoff.
Enables or disables solar control and sets operation logic.
Sets lights operation mode (manual, timer, solar, etc.).
Sets Aux1 output operation mode (manual, timer, solar, etc.).
Sets Valve3 operation mode (timeclock, solar, cleaner, etc.).
Step-by-step guide to manually operate the spa functions.
Step-by-step guide to program automatic spa operation via timeclock.
Puts the system into service mode for manual equipment control.
Alerts to system faults and abnormal conditions.
Provides detailed system status and error information.
Displays measured salt level for chlorinator operation.
To Next Page
