To Next PageTo Next Page
Need help?Do you have a question about the Hayward Pro Series Top-Mount and is the answer not in the manual?
General| Filter Type | Sand |
|---|---|
| Mount Type | Top-Mount |
| Operating Pressure | 50 PSI |
| Inlet/Outlet Size | 2 inches |
| Model Numbers | S310T |
Identifies and defines hazards related to suction outlets, including hair, limb, body, evisceration, and mechanical entrapment.
Provides instructions to minimize suction entrapment risks, including outlet placement, dual blockage, flow rate limits, and component maintenance.
Covers critical safety advice for system operation, electrical connections, pressure limits, valve operation, and component integrity.
Describes the Hayward Pro Series high-rate sand filter as a high-performance, corrosion-proof unit for clear pool water.
Explains the process of dirt removal by filter sand, water flow, and the need for backwashing.
Details site selection, mounting base assembly, and tools required for filter installation.
Guides on properly loading sand media, including using a sand shield and filling the tank partially with water.
Instructs on assembling the filter control valve, including the O-ring, clamp, pressure gauge, and connecting the pump.
Covers connecting return lines, suction lines, waste lines, and electrical connections, ensuring winter drain cap is secure.
Outlines the steps for the initial start-up of the filter system after installation, including valve positions and pump operation.
Details the crucial steps for starting the filter system, emphasizing opening all valves before pump operation.
Explains the process of backwashing to clean the filter sand and rinsing to remove residual dirty water.
Describes the functions of the Vari-Flo control valve positions: Filter, Backwash, Rinse, Waste, Recirculate, and Closed.
Provides instructions for completely draining the filter tank and setting the control valve to an inactive position for winter.
Offers solutions for common pool filtration issues: low water flow, short filter cycles, and unclear pool water.
Provides recommended pH, alkalinity, and chlorine levels for pool water and actions to correct imbalances.
Details the one-year warranty for defects in materials and workmanship, including terms for repair or replacement.
Instructions for filling out and mailing the warranty registration card to activate coverage.
