Need help?Do you have a question about the Hayward SUPREME HP80TR and is the answer not in the manual?
General| Model | SUPREME HP80TR |
|---|---|
| Category | Heat Pump |
| Phase | 1 |
| Amps | 30A |
| Refrigerant | R410A |
| Max Water Temp | 104°F |
| Min Ambient Temp | 40°F |
| Compressor Type | Scroll |
| Heating Capacity | 80, 000 BTU/h |
| Voltage | 208/230V |
Provides a visual guide for the heat pump unit's installation and water system connections, including valves and filters.
Details on connecting the heat pump to the pool's water system, including pipe types and condensation management.
Instructions for the proper electrical connection of the heat pump unit, including grounding and power supply requirements.
Step-by-step procedure for the initial start-up of the heat pump unit after installation.
Guidance on adjusting the by-pass valve to achieve the correct water flow and temperature difference.
Procedure for setting and viewing the desired water temperature (set point) for the heat pump.
Guide to identifying and resolving faults displayed on the screen with error codes.
To Next Page