To Next PageTo Next Page
Need help?Do you have a question about the Hayward SwimClear C4030 and is the answer not in the manual?
General| Filter Type | Cartridge |
|---|---|
| Flow Rate | 150 GPM |
| Turnover (8 Hours) | 72, 000 gallons |
| Turnover (10 Hours) | 90, 000 gallons |
| Cartridge Quantity | 4 |
| Operating Pressure | 50 PSI |
| Tank Material | Reinforced Thermoplastic |
| Filter Area | 425 sq ft |
| Inlet/Outlet Size | 2 inches |
| Cartridge Material | Polyester |
Explains risks of explosive separation if safety instructions are not followed.
Warns against pressure testing exceeding 50 PSI, which can cause explosive separation.
Details high voltage electricity risks in pool equipment, including shock and electrocution.
Outlines severe injury/death risks from suction outlets like hair, limb, body, evisceration, and mechanical entrapment.
Details how to position the filter system on a level base, ensuring accessibility and safety.
Explains how to connect the pump discharge and pool return lines to the filter ports.
Lists crucial pre-start checks, including component verification and valve positions.
Provides instructions for safely starting the system and managing initial water flow.
Describes how the filter works, pressure readings, and when to clean cartridges.
Steps to safely shut down and prepare the filter for maintenance or cleaning.
Guides on how to remove the filter cartridges from the housing for cleaning.
Details the proper methods for washing and cleaning filter cartridge elements.
Instructions for placing clean cartridges back into the filter body.
Steps for cleaning critical sealing surfaces before reassembly.
Guidance on correctly reassembling the upper and lower filter bodies with the clamp.
Notes on performing pool vacuuming directly through the filter.
Steps for properly removing and reinstalling the manual air relief valve.
