HB Racing D817 V2 User Manual

Vol.1 204334
En
HB D817 V2 KIT
De Fr
Instruction Manual
En
Bauanleitung
De
Fr
Manuel de montage

HB Racing D817 V2 Specifications

General

Brand	HB Racing
Model	D817 V2
Category	Motorized Toy Car
Language	English

Summary

Safety and Operation Guidelines

General Safety Precautions

Essential safety warnings and cautions for operating the RC car, including potential hazards.

Pre-Operation and During Operation Checks

Ensures the vehicle is safe and ready for operation, covering checks before and during use.

Heat, Fire, and Fuel Safety Management

Critical safety measures for handling fuel and managing hot components during operation.

Front Shock Assembly

Step A-01: Front Shock Kit Assembly

Differential Assembly

Step B-01: Rear Differential Assembly

Step B-02: Center Differential Assembly

Chassis and Suspension Assembly

Steps F-01 to F-03: Suspension Arm and Drive Train Assembly

Assembles suspension arms, drive shafts, and related drive train components.

Steps F-04 to F-07: Chassis Reinforcement and Linkages

Installs chassis reinforcements, sway bars, and fine-tunes suspension linkages.

Steering and Front Suspension Assembly

Steps G-01 to G-03: Steering Knuckle and Hub Assembly

Rear Suspension and Chassis Refinement

Steps H-01 to H-03: Rear Suspension Arm and Hubs

Steps H-04 to H-06: Chassis Bracing and Sway Bars

Step H-07: Final Rear Suspension Links

Rear Suspension Setup

Step I-01: Rear Hub and Linkage Attachment

Engine and Clutch Installation

Step K-02: Clutch Bell and Flywheel Mounting

Steps K-03 & K-04: Engine Mounting and Fuel System

Mounts the engine and connects the fuel and exhaust systems for operation.

Electronics and Linkage Setup

Steps L-01 & L-02: Battery and Receiver Installation

Step L-03: Linkage Setup Adjustments

Step L-05: Throttle and Brake Linkage Adjustment

Finalizes throttle and brake linkage settings for optimal control and performance.

Body Shell Preparation and Installation

Step M-01: Body Painting and Hole Making

Steps M-02 to M-04: Body Mounting and Securing

Vehicle Setup and Tuning Guide

Front and Rear Suspension Setup

Details settings for ride height, camber, toe, and sway bars for front and rear suspension.

Shock Settings and Drivetrain Configuration

Specifies oil weights, pistons, springs for shocks, and engine/tire/diff configurations.