♦ If the product does not work properly
1. Check whether the power is on
2. Check whether the voltage is too low
3. Check all connections from battery to refrigerator for looseness or poor contact
4. Check the fuse
5. Check whether the refrigerator is turned on
6. Check whether the temperature set too high
♦ If the refrigeration performance is poor
1. Too much food is put in the refrigerator
2. The temperature of the food in the refrigerator is too high
3. The door is not closed properly
4. Whether the door seal (sealing ring) is damaged
5. Whether the ventilation around the refrigerator is good
6. The environment temperature is too high
7. Incorrect temperature setting
♦ You can hear the sound of "water flowing" in the refrigerator
This is normal. It is caused by the flow of refrigerant
♦ When the refrigerator starts, the sound is loud
1. Check whether the refrigerator is placed on a flat horizontal surface for use
2. Check the surrounding objects for vibration
3. At the moment of starting the compressor, when the motor runs from static to high speed,
the sound will be a little louder. After the speed is stable, the sound will decrease. It is a nor
mal phenomenon
♦ There are water drops around the shell or door seal
It is normal for moisture in humid air to liquefy and condense into water droplets when it com
es into contact with a lower temperature shell
Troubleshooting
Technical parameter
Standard packing list
1 * Car refrigerator
1* DC cable
1* AC cable and adapter
Specific value refer to the table below:
Error
E 0
E 1
E 2
E 3
E 4
E 5
Problem Solution
The temperature sensing head
is damaged
Input voltage is too low
DC fan over current protection
Abnormal start of compressor
Abnormal compressor speed
Module temperature too high
Please check or replace the
temperature sensor
Please check the input voltage and
adjust the battery protection level
Please check the cooling fan
Please turn off the power and let it
stand for 30 minutes
Please adjust compressor operation
mode (MAX/ECO)
Please move the refrigerator to a
ventilated place to lower the module
temperature
Model
Input voltage
Temperature control range
Cryogen
Insulation material
Rated power
Rated current
Net weight
Product size (L * W * H) mm
Packing Size (L * W * H)mm
35L 45L 55L
DC 12V/24V, AC110-240V
-20<C~20<C
R134a
polyurethane foam
45W±20%
13.3Kg 14.2Kg 15.0Kg
726*390*373 726*390*443 726*390*513
704*440*442 704*440*5122 704*440*582
3.75A/1.875A
To Next Page
Loading...