Need help?Do you have a question about the HCO SG580MB and is the answer not in the manual?
General| IR Flash | 65Ft/20m |
|---|---|
| PIR Distance | 65ft/20m |
| Trigger Time | 1.1 Second |
| Detection Distance | 65ft/20m |
| Trigger Speed | 1.1s |
Details the digital scouting camera's features, trigger mechanisms, image/video capture, and communication capabilities.
Outlines the camera's I/O interfaces including USB, SD card slot, TV output, and DC power connector.
Explains the infrared remote control, navigation, and character input for menu operations.
Explains the on-screen display elements when the camera is powered on, including settings and status indicators.
Details the camera's ability to send pictures via GSM/GPRS network and its supported frequency bands.
Specifies the supported file formats for photos (JPG), videos (AVI), and file systems (FAT32).
Details how to install AA batteries, recommended types, and battery slot grouping for camera power.
Guides on inserting the SD card and SIM card correctly, noting write-protection and orientation.
Instructions for powering on the camera, avoiding trigger disturbances, and adjusting the camera angle.
Explains how to enter TEST mode and its functions: Custom Settings, Manual Capture, and Media Viewing.
Describes accessing the menu to manually customize camera settings via the LCD or TV monitor.
Explains manual capture and how to view captured images/videos on camera or TV.
Describes sending MMS in different modes and how to power off the camera.
Introduces the settings menu, accessible in TEST mode, listing seventeen menu items.
Covers settings for Photo Size, Video Size, Set Clock, Photo Burst, Video Length, and Video Sound.
Configures PIR sensitivity, triggering interval, and camera active timer.
Explains how to switch between Camera (Photo) and Video modes using shortcut keys or the menu.
Provides instructions to format the SD card, which erases all data.
Details how to set the photo resolution to 5MP or 8MP.
Explains how to set video resolution to VGA (640x480) or QVGA (320x240).
Guides on setting the camera's date and time, including format options.
Details how to configure the number of photos taken per trigger.
Explains how to adjust the duration of video recordings.
Instructions on enabling or disabling sound recording for videos.
Explains how to set the delay between triggers to avoid continuous activation.
Details how to adjust PIR sensitivity (High, Normal, Low) based on environmental factors and temperature.
Explains how to set specific active times for the camera.
Guides on configuring MMS parameters like URL, APN, IP, and Port.
Details how to configure GPRS settings, including server, port, APN, and account details for email.
Explains the different MMS sending modes: Manual, Daily Report, and Instant.
Guides on specifying phone numbers or email addresses for MMS/Email transmission.
Instructions on setting and entering a password for accessing TEST mode.
Details how to restore all camera settings to their factory default values.
Introduces playback mode for viewing and deleting images/videos.
Explains how to view photos and videos on the LCD screen or TV monitor.
Guides on deleting individual or all images and videos from the SD card.
Describes how to manually send selected images via MMS when in Manual mode.
Explains laser pointer usage and file naming conventions, including a safety note.
To Next Page
