HCW PASHW030 - 4.2.5 Clock and Timer Settings

10
4. USAGE AND OPERATION
4.2.5 Clock setting
In the main interface, press ‘’CLOCK’’ twice. Hours start to flashing, and press ‘’ ‘’
to increase value or press ‘’ ‘’ to decrease value, and press ‘’CLOCK’’ to setting.
At the same time, minute start to flashing, press ‘’ ‘’ to increase value or press ‘’ ‘’
to decrease value, and press ‘’CLOCK’’ to save setting.
Press " " can not save setting parameter and back to main interface.
ATTENTION : If there is no operation for 5s system will remember parameter setting and
back to the main interface.
Hours Minute