3. INSTALLATION AND CONNECTION
3.1 Installation illustration
Installation items:
The factory only provides the main unit and the water unit; the other items in the
illustration are necessary spare parts for the water system, that provided by users or
installer.
ATTENTION :
Please follow these steps when using for the first time:
1- Open valve and charge water
2- Make sure that the pump and water-in-pipe have been filled with water
3- Close the valve and start the unit
ATTN: It is necessary that the water-in-pipe is higher than the pool surface.
Installation must be performed in accordance with the requirements of NEC and CEC
by authorized personnel only.
4
To Next Page
