Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Diva Overview
Team HDfury would like to thank you personally for purchasing the 4K Diva!
This unique HDMI2.0b device supports up to 4 inputs for true full 4K60 4:4:4 600MHz 18Gbps bandwidth
signals. It will allow you to solve any HDCP error, extract full HDMI audio from HDMI sources and
ARC/eARC up to Atmos HBR over TrueHD from ARC and eARC TVs to feed older AVR and Matrix any
SD/HD/FHD/UHD/HDR/DV or PC signals up to 600MHz. Upscale to 4K or downscale to 1080p SDR any
channel individually, display relevant information on OLED/OSD, select between multiple edid banks for
each inputs. Inject, replace or translate HDR metadata and AVI infoframe. It is also capable of auto
switching any sources including X1X, ATV4K, Shield, etc… Based on incoming content type it can send
relevant RS232 commands to any RS232 controllable display. Control can be completed with IR codes,
push buttons on the unit, via IP or RS232 (MAC/WIN/Linux) or through embedded Webserver (for any
web browser based device such as MAC/WIN/Linux computer or Android/iOS phones, tablets and
others).
Additionally, Diva supports video responsive ambient light and LAG tester feature.
To Next Page
Loading...
