Do you have a question about the HDI 2021 and is the answer not in the manual?
Manual covers installation, operation, maintenance, and calibration of the HDI 2021 Transducer Assembly.
Procedures for checking received items against the packing list and reporting damage to the freight forwarder.
Guidelines for safe handling and storage to prevent damage, especially to the pressure sensor, to avoid voiding the warranty.
Specifies that experienced personnel are required for handling, installation, and maintenance, with optional schooling available.
Describes the transducer as an embedded strain gauge in a stainless steel case, housed in hammer unions or flanges.
Details the main parts of the system, including pressure transducers and cables, and their types.
Lists pressure ratings for transducers, including over-pressurization capabilities for different units.
Details the transducer and cable components, including mounting instructions and cable length recommendations.
Describes mounting the pressure transducer housing using standard practices, with care to protect the transducer pill.
Explains the system comprises transducer and cable, using a Wheatstone Bridge Strain Gauge to convert pressure to an electrical signal.
States the HDI 2021 is factory preset and requires no periodic calibration, based on a strain gauge design concept.
Emphasizes maintaining cable integrity, visual checks for abuse, periodic cleaning, and scheduling calibrations if required.
Presents the CSA Certificate of Compliance for the products, detailing relevant standards and issue dates.
Shows the CSA certification markings for the Gauge Head and Sensor components, including safety classifications.
Presents ATEX certification markings for the Gauge Head and Sensor components, specifying intrinsic safety details.
Details the one-year warranty period, HDI's obligation to replace or repair defective parts, and conditions for claims.
| Brand | HDI |
|---|---|
| Model | 2021 |
| Category | Transmitter |
| Language | English |