d.
e.
f.
g.
h.
2.
a.
b.
c.
d.
- 06 -
Please ensure that top cover of the cleaner is tightly assembled with its chas-
sis.
Do not touch the wall to avoid scratching the wall or damaging the cleaner.
when putting into or lift out from pool.
It is necessary to stay on the water surface for 10-15 seconds until water flows
out from the cleaner to the pool before being placed on the ground.
Lift the handle or clips of the cleaner out from the pool.
Power off the cleaner after use.
Quick operation
Connect the cleaner and home power with adapter and charging line to charge
the battery.
* Clean the charging port before charging.
* Red charging indicator light indicates the battery is charging.
* Green charging indicator light indicates charging is finished.
* Push the switch to OFF before charging.
Push the switch to ON,the cleaner is power-on and the indicator light is
steady blue,then putting it into water. About 10 seconds after power-on,the
cleaner begins to work and the blue light flashes.
When battery power almost depletes, the cleaner will move close to pool wall.
The indicator light is flashes red about 3 hours before the cleaner completely
stop.
Power-off operation: push the switch to OFF and the red or blue light turn off,
while the cleaner is power-off. Please timely clean the filter tray after use.
To Next Page
Loading...