04
1. INTRODUCTION
GENERAL INFORMATION
This manual is an integral and essential part of the electrically power assisted cycle (EPAC).
Before using the bike for the first time, it is essential that users read, understand and strictly
observe the requirements outlined below.
The Company shall not be liable for any damages caused and is in no way responsible for
damages caused to property or persons when:
• the product is used incorrectly or in a manner that does not comply with the instruction
manual;
• after purchase, the product is modified or tampered with in all or some of its components.
In the interest of technological development, the manufacturer reserves the right to modify
the product in question without prior notice and without automatically updating this manual.
For information and to consult any revisions to this manual visit the website
www.platum.com/en/manuals/
AFTER-SALES SERVICE
For any problem or request for clarification, please do not hesitate to contact the technical
after-sales service of your authorised dealer who has expertise and specialist knowledge and
access to specific tools and original spare parts.
LEGAL NOTE FOR USE
Check and observe the highway code and local road regulations in force for cyclists on any
restrictions for riders, who may use the product, and on the use of this type of product.
VISUAL REPRESENTATION OF THE SAFETY WARNINGS
To identify the safety messages in the manual, the following warning symbols will be used
which serve to draw the reader’s attention in order to ensure that the electrically power
assisted cycle is used correctly and safely.
Care required
Highlights the rules to follow to prevent damage to the electrically power assisted cycle and/
or to prevent hazardous situations from occurring.
Residual risks
Highlights the presence of hazards causing residual risks, which the user must be aware of to
prevent injury or damage to property.
DANGER
CAUTION
To Next Page
Loading...