Heal-Tech GIpro X-type G2 User Manual

GPXT_UsersGuide_en.pdf [rev. 001] - 1 -
www.healtech-electronics.com
GIpro X-type G2
Gear Position Indicator with programmable
Engine Speed and High Speed Warning
User’s Guide
1. Foreword
Congratulations on your purchase of a GIpro X-type gear position indicator.
The GIpro products from HealTech Electronics Ltd. are the most advanced gear position
indicators on the market today.
This GIpro model will fit all motorcycles and vehicles which have an electronic
speedometer (either analogue or digital readout). Your speedometer is electronic if the
odo/tripmeter has LCD readout. If your speedometer is cable driven, it is still possible to
install this product with our universal GPX-WSS harness kit.
Due to the advanced microprocessor and sophisticated firmware, the GIpro-X offers
faster and more reliable readings than competing products.
The unit is also the smallest, most compact gear indicator available, making it easy to
mount at the instrument cluster.
2. Installation
The Harness Kit required for the installation is supplied separately. Along with the X-type
display unit, please make sure to order the correct wiring harness kit for your bike.
Please refer to the install instructions received with the Harness Kit.
3. Operation
After programming, the unit shows the actual gear position while riding. Optionally, it
may also warn you when the set road speed and/or the set engine speed is exceeded.
Most motorcycles we list the GIpro X-type unit for are not equipped with Gear Position
Sensor, therefore determining and displaying the gear in use is only possible when the
engine is running and the clutch is fully released. At other times (clutch pulled-in, engine
not running, bike stopped) the display will show a “-” sign.
The GIpro will NOT show an incorrect gear in any circumstances, except for a split
second when the clutch is released slowly (slipping) during a back shift.
4. Specifications
- Supply voltage: +8V to +24V
- Maximum supply current at 12V: 60 mA
- Reverse polarity and transient protection on all leads
- Unit size: 20 x 30 x 13 mm (0.7 x 1.2 x 0.5 inches)
- Operating temp: -40C to +80C (-40F to +176F)
- Waterproof (IP68)

Heal-Tech GIpro X-type G2 Specifications

General

Brand	Heal-Tech
Model	GIpro X-type G2
Category	Touch Panel
Language	English

Summary

Foreword

Installation

Operation

Specifications

Features

Fast and Accurate Gear Indication

Provides instant and accurate gear indication with adjustable sampling period for control and safety.

Touch Sensor Operation

Allows all settings adjustments via a sealed touch-sensitive area on the unit's top.

Quick and Easy Installation

Features Plug 'n Go wiring harness kits for installation completion within 45 minutes.

Bright LED Display

Offers an extra bright LED display housed in a compact box, available in 5 colors.

Automatic Brightness Control

Adjusts display brightness automatically according to ambient light intensity.

High Speed and Shift Light Warnings

Optionally warns when set road speed and/or engine speed is exceeded.

Auto Learning Functionality

Automatically learns gear positions upon starting the learning function via the menu.

Broad Compatibility

Compatible with all HealTech and most aftermarket products, including quick shifters.

Robust and Waterproof Design

Features SMT design, epoxy encapsulation, flash memory, and 100% waterproof (IP68) rating.

Setup Menu Options

Reading Firmware Version

Access and display the unit's firmware version number.

Learning Gear Positions

Initiates the procedure to teach the unit all available gear positions.

Adjusting Filtering

Fine-tunes the response speed during gear changes by adjusting the sampling period.

Adjusting Brightness Sensitivity

Controls the ambient light sensor sensitivity for display brightness.

Configuring High Speed Warning

Sets a warning alert when the vehicle exceeds a programmed speed limit.

Configuring Engine Speed Warning

Sets a warning alert when the engine RPM exceeds a programmed limit.

Flipping Display Orientation

Allows flipping the display orientation for different mounting positions.

Resetting to Factory Defaults

Restores all settings, including learning data, to their original factory values.

Display Cleaning and Warranty

Cleaning the Display

Instructions for cleaning the display using a wet sponge and pure water.

Product Warranty Information

Details on the unit's epoxy encapsulation, testing, 30-day money-back guarantee, and 2-year warranty.