HealTech Electronics GIpro w/ATRE - User Manual

http://www.healtech-electronics.com - 1 -
GIpro w/ATRE
- Electronic Gear Indicator with Advanced Timing Retard Eliminator -
Specifically designed for Triumph Rocket III (2004-2010)
User’s Guide
1. Foreword
Congratulations on your purchase of a GIpro unit.
The GIpro from HealTech Electronics Ltd. is not only the most advanced gear indicator on
the market, but also the best TRE device available for selected Triumph motorcycles.
This product will fit Triumph motorcycles with Gear Position Sensor (GPS).
2. Warranty
To ensure trouble-free operation from the start, all GIpro units have been extensively tested
prior to shipment.
Should you not be entirely satisfied for any reason, our dealers are offering a 30-day
money-back guarantee (all parts must be returned in original condition for full refund).
Furthermore the product is covered by our 2-year replacement guarantee from the date of
purchase. (The unit should not be damaged or subjected to over-voltage.)
Please contact us in warranty issues at support@healtech-electronics.com
regardless of
the place of purchase.
3. Electrical Specifications
- Supply voltage: +9V to +16V
- Reverse polarity and transient protection on all leads
- Supply current in stand-by: 4 mA @ 12V
- Maximum supply current: 85 mA @ 12V

Summary

Foreword

Warranty Information

Electrical Specifications

Product Features

Fast and Accurate Gear Display

Instant and accurate indication of selected gear for added control and safety.

Quick Installation Process

Plug-n-go wiring harness, easy to mount display. Complete installation in about 30 minutes.

Advanced Timing Retard Eliminator (TRE)

Improves response, acceleration in lower gears, and disables speed limiter. Switches off in Neutral.

Large, Effective Display

1 inch, extra bright display housed in a compact box.

Simple One-Button Operation

All functions accessed with the button under the display. No separate programming key needed.

Automatic Brightness Control

Display brightness varies with ambient light intensity. Sensitivity can be fine-tuned.

Auto Learn Gear Function

Unit is pre-programmed but learns gear positions automatically if needed.

Auto Stand-by Power Mode

Unit enters low power mode consuming 4mA when ignition is off.

Robust Design and Construction

Waterproof housing, SMD design, flash memory, high-quality components, tested prior to shipping.

How Tos and Procedures

Activating the Display

Display indicates actual gear when ignition is ON and engine switch is RUN.

Reviewing and Changing TRE Mode

Cycle through 4 TRE modes (Normal, Soft, Medium, Hard) via button press.

Starting Auto-Learning Procedure

Procedure to teach the unit gear positions if they are not indicated correctly.

Unit Operations and Maintenance

Resetting the Unit to Factory Defaults

Clears recorded gear positions and resets TRE mode and brightness sensitivity.

Checking Gear Position Settings

Confirms if default or custom (taught) gear positions are in use after restart.

Adjusting Auto Brightness Sensitivity

Adjusts display brightness sensitivity across 10 levels (0-9).

Cleaning the LED Display

Wipe with wet sponge; avoid dry cloth or high-pressure water on display.

HealTech Electronics GIpro w/ATRE Specifications

General

Brand	HealTech Electronics
Model	GIpro w/ATRE
Category	Motorcycle Accessories
Language	English