HealthCare International PhysioGait PG-360 User Manual

INSTALLATION AND OPERATION MANUAL
Dynamic Unweighting System
PhysioGait
PG-360
HealthCare International
PO Box Langley, WA 98260
206-739-5400 | orders@hcifitness.com | wwww.hcifitness.com

HealthCare International PhysioGait PG-360 Specifications

General

Product Name	PhysioGait PG-360
Brand	HealthCare International
Category	Fitness Equipment
Type	Treadmill
Incline Range	0 - 15%
Weight Capacity	400 lbs
Display	LCD
Programs	12

Summary

1. Introduction

General Instructions

General instructions for safe and proper operation and maintenance of the device.

1.1. Symbols and Warnings

Cautionary Symbols

Indicates activities that can cause deterioration or safety hazards if performed incorrectly.

Applied Part and Safety Markings

Identifies the type of applied part, manufacturer, and protection rating.

Operational Controls and Indicators

Explains the functions of hand and panel controls and battery indicators.

2. Device Characteristics

2.1. Intended Use

Describes the specific purpose and application of the gait therapy device.

Manufacturer's Disclaimers

Manufacturer's right to change specs and non-liability for misuse.

2.2. Technical Parameters

Dimensions and Adjustments

Specifies key dimensions and adjustment ranges of the device.

Operational Specifications

Details operational modes, load limits, weight, voltage, and battery specifications.

Environmental and Safety Specifications

Lists electrical supply, protection levels, and environmental conditions for operation.

3. Construction and Operation

3.1. Construction Components

Lists and illustrates the main construction components of the device.

Modification Warning

Warns against unauthorized modification of the device.

Wheeled Base Component

Describes the wheeled base and its features.

3.2. Gate Adjustment

Component Descriptions

Describes various components like grips, control box, column, arm, panel, handrails, and wheels.

Gate Spacing Adjustment

Provides detailed instructions for adjusting the gate spacing.

3.3. Accessories and Additional Equipment

Included Device Set

Lists all items included in the device set.

Optional Accessories

Mentions optional accessories like an additional battery.

3.5. Transport and Storage Conditions

Ambient Conditions for Transport

Details the ambient conditions required for storage and transport.

4. Safety Precautions

Load Capacity and Liquid Contact

Warns about load limits and avoiding liquid contact with the controller.

Harness and Operation Safety

Stresses proper harness fitting and attachment/detachment procedures.

Manufacturer Liability and Humidity Restrictions

States non-liability for misuse and prohibits operation in high humidity.

Minimum Safety Height

Specifies a minimum safety height requirement for operation.

5. Preparation for Use

Installation Personnel and Location

Requires two people for installation and careful location selection.

6. Assembly of the Device

Assembly Preparation

Instructs to unpack, prepare tools, and notes the need for two people.

Device Components

Device Delivery and Components

Notes device is delivered disassembled and lists main assemblies.

Wheel Base and Support Frame

Describes the wheel base and support frame assemblies.

Controller, Grips, and Lifting Column

Details the controller, grips, and lifting column assemblies.

Suspension, Panel, and Seat

Describes the suspension, panel, and seat assemblies.

Harness Component

Lists harness sizes and quantities.

Gate Assembly Instructions

Gate Component Assembly

Instructions for assembling gate components and setting width.

Wheel Color Functions

Explains the meaning of wheel colors (green/red) for function.

Gate Damper and Stringer Assembly

Specifies damper positioning and stringer assembly instructions.

Column to Gate Assembly

Sling, Swivel, and Electronics Assembly

Desktop Mount Assembly

Controller and Bracket Assembly

Bracket and Column Mount Assembly

Final Component Assembly

7. Operating the Device

Safety During Operation

Warns to maintain safe distance, secure device, and lock castors for treadmill use.

Monitoring and Malfunction Response

Requires monitoring and outlines response to malfunctions.

Treadmill Treatment Clothing Advice

Provides advice on patient clothing for treadmill treatment.

7.1. Height Adjustment

Head Injury Warning

Warns of potential head injury during height adjustment.

Remote Control Height Adjustment

Explains how height adjustment is performed using the remote control.

7.2. Dynamic Weight Bearing Adjustment

Weight Bearing System Adjustment

Details how to adjust the dynamic partial weight bearing system using a knob and screw.

7.3. Castor Locking and Direction

Castor Operation and Safety

Explains castor locking prevents rotation but not slipping, and advises locking directional wheels.

Setting Directional Lock Sequence

Provides a step-by-step procedure for setting directional locks.

7.4. Harness Mounting

Harness Compatibility and Guidelines

Mandates approved harnesses and adherence to guidelines.

Harness Strap Adjustment and Fastening

Explains harness strap purpose, adjustment, and fastening procedure.

Harness Fastening Procedures

Final Harness Strap Adjustments

Instructs on final strap adjustments for secure and ready use.

Harness Fastening Steps

Details step-by-step procedures for correctly fastening the harness.

7.5. Mounting Harness to Device

Pre-Session Harness Check

Mandates checking harness condition before each session.

Device Harness Mounting Procedure

Provides steps for mounting the harness to the therapy device.

7.6. Handrail Adjustment and Replacement

Handrail Locking and Security

Warns to rigidly lock handrails and secure the pin by tightening.

Handrail Adjustment Procedure

Explains how to adjust and change handrails using retaining pins.

Handrail Height Adjustment

7.7. Swivel Sling Adjustment

Swivel Sling Function and Control

Explains the function and rotation control of the swivel sling.

7.8. Operator Stool Installation and Adjustment

Stool Lock and Mounting

Advises to block the stool's position lock after mounting or adjustment.

Stool Installation and Movement

Describes the stool's mounting, movement, and locking mechanism.

7.9. Battery Status Check

Checking Battery Level

Explains how to check battery status via the remote control indicator.

6.10. Lifting Column Battery Charging

Charging Safety Instructions

Advises disconnecting power and preventing terminal connections when storing.

Battery Charging Procedure

Details the battery charging process using a docking station and power supply.

7.11. Lock Button Function

Unauthorized Access Prevention

Instructs to press the lock button after work to prevent unauthorized use.

7.12. Weight Bearing Measurement System

System Components Overview

Introduces the two main components of the measurement system.

7.13. Weighing Module Features

Weighing Module Indicators and Controls

Identifies indicators, reset button, and charger socket on the weighing module.

Weighing Module Functions

7.14. Panel Battery Charging

Charger Compatibility Warning

Prohibits the use of unauthorized power cords and chargers.

Panel Battery Charging Process

Details the procedure for charging the built-in battery using the supplied charger.

7.15. Operator Panel Functions

Panel Controls and Indicators

Identifies charger socket and reset button on the operator panel.

Panel Activation and Deactivation

Explains how to activate and turn off the operator panel.

Status Bar and Connection Screen

Explains status bar indicators and the connection waiting screen.

User Settings Configuration

Displaying Weight Bearing Data

Explains the display of weight relief values on the main screen.

Weight Bearing Display Modes

Describes different display modes for weight bearing values.

Peak Load Relief Mode

Explains how to activate and use the peak load relief mode.

Accessing User Settings

Details how to enter the user settings menu.

Measurement Reset Procedure

Explains how to reset the measurement display.

Patient Weight Entry

Describes how to manually enter and set patient weight.

Panel Settings and Operations

Patient Weight Measurement

Explains the procedure for weighing the patient.

Weight Unit and Relief Display Settings

Describes settings for weight units and relief display modes.

Automatic Off Time and Peak Load Settings

Details settings for auto-off time and peak load relief hold time.

Backlight and Module Connection Settings

Describes backlight adjustment and connecting to the weighing module.

Device Search and Connection

Details the process of searching for and connecting to compatible devices.

Device Management and Operation

Device Search and Disconnection

Describes the search screen, device selection, and disconnection process.

Screen Orientation and Language Selection

Details screen orientation configuration and language selection.

Return to Main Screen

Explains how to exit the setup menu and return to the main screen.

8. Operating Conditions

Hygiene and Disinfection Requirements

Mandates cleaning and disinfection of surfaces after each use.

Device Service Life

States the expected service life of the device and manufacturer liability.

8.1. Cleaning Patient Contact Surfaces

Standard Cleaning Procedures

Provides detailed instructions for cleaning handles and suspension.

Harness Cleaning and Disinfection

Explains how to clean the harness, including hand washing option.

Prohibited Cleaning Agents

Lists cleaning agents and substances that should not be used.

Cleaning Agent Damage Warning

Warns about potential damage from improper cleaning agents.

8.2. Support Structure Maintenance

Metal Part Cleaning

Instructs on cleaning metal parts with a damp cloth.

Lubrication Schedule and Points

Details the lubrication schedule and points for mobile nodes.

Threaded Connection Inspection

Details periodic inspection of threaded connections and backlash removal.

Backlash Reporting and Operation Halt

Instructs to report and cease operation for irremovable backlash.

8.3. Column Check

Quarterly Column Inspections

Details quarterly inspections for column functioning and sound anomalies.

8.4. Battery Maintenance

Continuous Battery Charging Guidelines

Specifies situations requiring continuous battery charging for at least 24 hours.

8.5. Electrical Safety Inspections

Electrical Safety Inspection Schedule

Mandates electrical safety inspections every two years or after repairs.

Minimum Inspection Scope

Lists the minimum checks required during electrical safety inspections.

9. Additional Options

Treadmill Operation Precautions

Reiterates locking castors and warns against exceeding treadmill upliftment.

Treadmill Compatibility

States compatibility of the lift with most treadmills.

10. Troubleshooting

Device Unresponsive to Remote

Lists troubleshooting steps for device unresponsiveness to remote control.

Battery Not Charging Issues

Provides troubleshooting steps for battery charging issues.

Device Stops During Lifting

Lists troubleshooting steps for device stopping during patient lifting.

Abnormal Device Noises

Provides troubleshooting steps for abnormal device noises.

Lift Movement Obstructions

Lists troubleshooting steps for the lift's inability to move.

Unresolved Malfunction Protocol

Advises stopping use and contacting the supplier/manufacturer if issues persist.

11. Recycling Information

12. Electromagnetic Compatibility (EMC)

EMC Operational Warnings

Warns against improper adjacent use, non-specified accessories, and RF equipment proximity.

Susceptibility to Disturbances

Notes potential susceptibility to electromagnetic disturbances.

EMC Declaration - Emissions

Reports RF emissions and harmonic emissions compliance.

Voltage Fluctuation Compliance

Reports voltage fluctuation/flicker emissions compliance.

EMC Declaration - Immunity

Details various immunity test levels and related guidance.

EMC Declaration Details

Power Frequency Magnetic Field Immunity

Details power frequency magnetic field immunity test levels and guidance.

Wireless Communications Immunity Guidance

Provides guidance on proximity fields from RF wireless communications equipment.

RF Wireless Immunity Test Data

Provides specific immunity test data for different RF frequency bands and services.