HealthyLine HEAT+PEMF - User Manual

i
Information
Please allow up to 40 minutes for the surface to reach
the maximum temperature.
Once flashing temperature has stopped, the indicator
displays the actual temperature measured at the core
of the Mat.
Press and hold
or to reach desired numbers faster.
Default PEMF frequency is set to 7.83 Hz and displayed
as 8 Hz.
FACTORY RESET
WITH THE CONTROLLER ON
The controller will shut
downand turn back ON
automatically
Press and
Hold for 10 sec
To turn PEMF OFF
PEMF
Press and Hold for 6 sec
Press PEMF button once to turn PEMF ON. Press PEMF again to initiate
PEMF frequency adjustment mode (PEMF indicator will start flashing).
Set the desired frequency (1-30 Hz) and press PEMF button again to save
the setting.
PEMF
SET and ADJUST
PEMF PEMF PEMF
TIME TIME
TIMER
SET and ADJUST
Press TIME button to initiate time adjustment mode (time indicator
will start flashing). Set the desired time and press TIME button again to
save the setting.
To switch between
Fahrenheit and Celsius
TIME
Press and
Hold for 6 sec
°F or °C
UNITS SET
TEMP TEMP TEMP
TEMPERATURE
SET and ADJUST
Press TEMP button once to turn Heat ON. Press TEMP again to initiate
temperature adjustment mode (temperature indicator will start flashing).
Set the desired temperature and press TEMP again to save the setting.
POWER
Press the Power button to turn ON the controller.
TEMP, TIMER, PEMF, PHOTON indicators will light up
on the screen.
HEAT + PEMF (1 - 30 Hz)
CONTROLLER
INSTRUCTION MANUAL

Summary

Controller Power Function

Controller Temperature Settings

Temperature Adjustment

Press TEMP to initiate temperature adjustment mode. Set desired temperature and press TEMP to save.

Unit Selection (°F or °C)

Press and hold the TIME button for 6 seconds to switch between Fahrenheit and Celsius units.

Controller Timer Settings

Timer Adjustment

Press TIME to initiate time adjustment mode. Set desired time and press TIME to save the setting.

Controller PEMF Settings

PEMF Adjustment

Press PEMF to initiate frequency adjustment mode. Set desired frequency (1-30 Hz) and press PEMF to save.

Turn PEMF Off

Press and hold the PEMF button for 6 seconds to turn PEMF OFF.

Controller Factory Reset

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Important Information and Warnings

This document describes the HealthyLine HEAT + PEMF (1 - 30 Hz) Controller, an instruction manual for a device used in conjunction with a gemstone heat therapy mat. The controller allows users to manage temperature, timer, and Pulsed Electromagnetic Field (PEMF) frequency settings for their therapy sessions.

Function Description

The HealthyLine controller is designed to provide precise control over various therapeutic functions of a compatible mat, primarily focusing on heat and PEMF therapy. It enables users to customize their therapy experience by adjusting temperature, setting session durations, and selecting specific PEMF frequencies. The device aims to promote relaxation, alleviate pain, improve circulation, and support overall well-being through controlled application of heat and electromagnetic fields.

Important Technical Specifications

• PEMF Frequency Range: The controller supports PEMF frequencies from 1 to 30 Hz. The default PEMF frequency is set to 7.83 Hz, displayed as 8 Hz on the screen.
• Temperature Units: Users can switch between Fahrenheit (°F) and Celsius (°C) for temperature display.
• Temperature Range Recommendations:
  • 95°F - 105°F (Overnight): Recommended for prolonged and overnight use, promoting better sleep and muscular relaxation. Safe for those sensitive to heat.
  • 105°F - 130°F (Over 2 HR): Suitable for cycles of 2 hours or less. Provides temporary relief of joint pain, stiffness, and minor muscle pain; promotes muscular relaxation and a temporary increase in local circulation.
  • 130°F - 150°F (30-90 MIN): Recommended for 30-90 minute cycles. Offers temporary relief of joint pain, stiffness, and minor muscle pain; promotes muscular relaxation and a temporary increase in local circulation. A twice-a-day limit is recommended.
  • 150°F - 160°F (30-60 MIN): Ideal for 30-60 minute cycles, providing a far infrared sauna effect when heat is captured by a mylar blanket. Promotes sweat production, temporary improvement in circulation, and faster recovery. A once-a-day limit is recommended.
• Heat-Up Time: Please allow up to 40 minutes for the mat surface to reach the maximum temperature.
• Temperature Display: Once the flashing temperature stops, the indicator displays the actual temperature measured at the core of the mat.

Usage Features

The controller offers a user-friendly interface with dedicated buttons for Power, TEMP, TIMER, and PEMF, along with '+' and '-' buttons for adjustments.

• Power On/Off: Press the Power button to turn the controller ON. TEMP, TIMER, PEMF, and PHOTON indicators will light up on the screen.
• Temperature Adjustment:
  1. Press the TEMP button once to turn Heat ON.
  2. Press TEMP again to enter temperature adjustment mode (the temperature indicator will flash).
  3. Use the '+' and '-' buttons to set the desired temperature. Press and hold these buttons to reach desired numbers faster.
  4. Press TEMP again to save the setting.
  5. To switch between Fahrenheit (°F) and Celsius (°C), press and hold the TEMP button for 6 seconds.
• Timer Adjustment:
  1. Press the TIME button to initiate time adjustment mode (the time indicator will flash).
  2. Use the '+' and '-' buttons to set the desired time.
  3. Press TIME again to save the setting.
• PEMF Frequency Adjustment:
  1. Press the PEMF button once to turn PEMF ON.
  2. Press PEMF again to initiate PEMF frequency adjustment mode (the PEMF indicator will flash).
  3. Use the '+' and '-' buttons to set the desired frequency (1-30 Hz).
  4. Press PEMF again to save the setting.
  5. To turn PEMF OFF, press and hold the PEMF button for 6 seconds.
• Factory Reset: With the controller ON, press and hold the FACTORY RESET button for 10 seconds. The controller will shut down and turn back ON automatically, restoring default settings.

Maintenance Features

While the manual primarily focuses on operation, it includes important information for optimal use and longevity of the device and mat:

• Controller Compatibility: Always use the correct controller for your specific mat model. Do not switch controllers between different mats, even if they appear to fit, as controllers are specifically designed for particular models and are subject to updates.
• Heat Retention: Cover the mat to retain heat and reach the desired temperature faster.
• Hydration: Drink plenty of water before, during, and after using the mat.
• Session Duration: The higher the temperature setting, the shorter the session should be.

Important Information and Warnings

• General Information: HealthyLine is a leading innovator in gemstone heat therapy technology, offering over 100 models with various sizes, voltages, and functions, each with specifically designed controller types.
• Warnings:
  • Do not use PEMF or high heat settings while pregnant.
  • Do not use PEMF or high heat settings if you have metal implants or a pacemaker.
  • Do not use if you have varicose veins.
  • Do not use with muscle relaxants.
  • Consult with your doctor if you have any serious medical condition before using this or any medical device.

HealthyLine HEAT+PEMF Specifications

General

Brand	HealthyLine
Model	HEAT+PEMF
Category	Controller
Language	English