Heart Interface 30 - User Manual

Part No. 90-0123-00
Libertycombi.p65 11/05/99
1
OWNER’S MANUALOWNER’S MANUAL
OWNER’S MANUALOWNER’S MANUAL
OWNER’S MANUAL
FREEDOM 458 Series COMBIFREEDOM 458 Series COMBI
FREEDOM 458 Series COMBIFREEDOM 458 Series COMBI
FREEDOM 458 Series COMBI
TMTM
TMTM
TM
INVERTER/CHARGERINVERTER/CHARGER
INVERTER/CHARGERINVERTER/CHARGER
INVERTER/CHARGER
®
INFORMA INFORMA
INFORMA INFORMA
INFORMA
TION IN THIS MANUALTION IN THIS MANUAL
TION IN THIS MANUALTION IN THIS MANUAL
TION IN THIS MANUAL
IS SUBJECT T IS SUBJECT T
IS SUBJECT T IS SUBJECT T
IS SUBJECT T
O CHANGE WITHOUT NOTICEO CHANGE WITHOUT NOTICE
O CHANGE WITHOUT NOTICEO CHANGE WITHOUT NOTICE
O CHANGE WITHOUT NOTICE
Model 10
Model 15
Model 20
Model 25
Model 30
*Manual includes all models of Freedom 458 Inverter/Charger

Heart Interface 30 Specifications

General

Brand	Heart Interface
Model	30
Category	Battery Charger
Language	English

Summary

SAFETY SUMMARY

THINGS YOU SHOULD KNOW

OPERATION

External AC Power and Front Panel Controls

Describes operation with external AC and functions of INVERT/CHARGE buttons.

Status LEDs and Battery Type Selection

Explains LED indicators for status and how to select battery type.

BATTERY TYPES

BATTERY INTERCONNECTION AND SIZING

Battery Bank Ratings and Sizing

Advises on deep discharge limits and sizing for battery longevity.

BATTERY CHARGING

Charging Requirements for Battery Types

Details specific charging needs for wet, gel, and AGM batteries.

Freedom Charger Stages and Operation

Explains the 3-stage charging process and operation modes.

Acceptance, Float, and Equalizing Stages

Details the Acceptance, Float, and manual Equalizing charge stages.

Equalizing Charge Process and Warnings

Describes the equalizing cycle, its benefits, and critical safety warnings.

BATTERY CHARGER VOLTAGE SETTINGS

Temperature-Compensated Voltage Settings

Provides a table of recommended charge voltages based on temperature and battery type.

INSTALLATION PRECAUTIONS

Key Installation Points and Warnings

Wiring Standards and Connection Procedures

INSTALLATION PROCEDURES

Grounding and Neutral Bonding

AC Wiring and Output Connections

GFCI, Remote, TSC, and DC Wiring

Battery Cable Fusing

Specifies required fuses and holders for different models.

Startup Tests and Verification

Charger Function Test and Completion

TROUBLESHOOTING

LED Status Interpretation for Troubleshooting

Explains how LED status indicates operational conditions or faults.

SPECIFICATIONS

Model and Electrical Specifications