To Next PageTo Next Page
Need help?Do you have a question about the Hearth & Home Outdoor Lifestyles ODLANAIG-48 and is the answer not in the manual?
General| Category | Indoor Fireplace |
|---|---|
| Model | ODLANAIG-48 |
| Width | 48 inches |
| Venting | Direct Vent |
| Finish | Black |
| Log Set Material | Ceramic Fiber |
| Weight | 250 lbs |
| Fuel Type | Natural Gas or Propane |
| BTU Input | 40, 000 BTU |
| Ignition Type | Electronic |
Details the product's certification and relevant standards.
Provides input BTU and orifice size for different models and gas types.
Guidance on adjusting input rate for installations above 2000 feet elevation.
Defines materials that will not ignite or burn.
Defines materials that can ignite and burn.
Outlines electrical wiring and grounding requirements per codes.
Specifies that the appliance is not for solid fuel and requires specific gas types.
Guidance on planning the appliance location and enclosure based on outdoor space definitions.
Lists the necessary tools and building supplies for installation.
Instructions for carefully removing and inspecting appliance parts before installation.
Provides diagrams showing the physical dimensions of the ODLANAIG-48 and ODLANAIG-60 models.
Important clearances to walls and combustible materials for fire safety.
Details minimum clearances required for vent terminations and air supply inlets.
States that this application does not require a hearth extension.
Guidelines for installing the appliance as a stand-alone unit.
Information on protecting the appliance from water and ensuring proper drainage.
Procedures for positioning, leveling, and securely installing the appliance.
Instructions for flashing the appliance to prevent water penetration.
Details electrical connection requirements, including GFCI protection and voltage.
Specific wiring instructions for the IntelliFire Pilot Ignition system.
Steps for accessing and wiring the appliance's junction box.
Instructions for installing the wall switch control panel and wiring.
Procedure for accessing the appliance's gas valve and control box.
Specifies required gas pressures for optimal appliance performance.
Instructions for connecting the gas supply to the appliance.
Information on converting the appliance for use with propane (LP) gas.
Guidance for installations at elevations above 2000 feet.
Guidelines for applying noncombustible facing material around the appliance.
Specifies clearances for mantels and wall projections above the appliance.
Instructions for removing protective packaging and shipping materials.
Procedures for cleaning the appliance interior after unpacking.
Information on installing approved optional accessories.
Ensures the correct placement of the pilot shield and media template.
Steps for installing the deflection glass into its support bracket.
Instructions for pouring and distributing crystal media into the hearth.
Guidance on removing the media placement template after media installation.
Lists available accessories such as conversion kits, media kits, and screens.
