5
Please contact 1-800-239-0689 for further assistance.
Pre-Installation
PLANNING ASSEMBLY
□ Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them.
□
□ Assembly of this product may require more than one person.
TOOLS REQUIRED
PRODUCT SPECIFICATIONS
Voltage 120 VAC, 60 Hz
Amps 12.5 Amps
Watts 1500 Watts
HARDWARE INCLUDED
NOTE: Hardware is not shown to actual size.
NOTE: Number of the hardware in ( ) is separated for
backup.
WARNING: The included plastic wall anchors (BB) are
intended for use with solid wall applications only (tile and
concrete). DO NOT USE WITH DRYWALL OR OTHER HOLLOW
WALL APPLICATIONS.
Philips Screwdriver
AA BB CC DD
Hand Drill
Part Description Quantity
AA Screws #8-1 1/2 in. 6 + (1)
BB Wall Anchor 6
CC Screw M6*12 4
DD Screw M4*8 4 + (1)
Measuring tape Level Stud
To Next Page
Loading...