To Next PageTo Next Page
Need help?Do you have a question about the Heartland BELMONT and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Frame Material | Steel |
| Product Type | Shed |
| Capacity | Varies by size |
| Exterior Dimensions | Varies by size |
| Exterior Length | Varies by size |
| Exterior Width | Varies by size |
| Interior Height | Varies by size |
| Door Opening Height | Varies by size |
| Sidewall Construction | Steel |
Check local building codes and HOA rules before construction.
Contact customer service for engineered drawings needed for permits.
Ensure a level surface for proper shed assembly. Page 7 details leveling methods.
Inventory all parts before assembly; contact support for missing or damaged items.
Lists materials required to complete the shed, found on page 4.
Explains symbols used throughout the manual for assembly guidance and hints.
Guide on selecting the best side of lumber and trim for visible surfaces.
Details materials and cut list for the floor frame, which is not part of the kit.
Details materials and cut list for floor panels, which are not part of the kit.
Lists materials for a heavy-duty floor frame, an optional addition.
Lists optional materials for finishing touches like drip edge and roofing felt.
Provides nominal vs. actual wood dimensions for clarity during assembly.
Details the recommended method for leveling the shed foundation using 4x4 runners.
Outlines general techniques and considerations for leveling the shed base.
Lists materials that can be used for leveling the shed foundation.
Instructions for installing roof felt for weather protection.
Guide for installing drip edge along roof edges for water management.
Outlines the terms and duration of the product's conditional warranty coverage.
Specifies the requirements that must be met for the warranty to be effective.
Details necessary maintenance and actions to validate and maintain the warranty.
