HeartSine samaritan PAD

Other manuals for HeartSine samaritan PAD

Questions and Answers

R
Ronnie CoxJul 29, 2025
What to do if HeartSine Medical Equipment has a red status indicator and beeping while device is on?
- S
  Scott DukeJul 29, 2025
  If the HeartSine Medical Equipment shows a red status indicator and beeps while on, you should immediately replace the Pad-Pak or find another defibrillator. If you don't have a spare Pad-Pak or alternative defibrillator, the device will keep analyzing the patient's heart rhythm and tell you when to do CPR, but it won't be able to deliver a shock.
W
William NolanAug 3, 2025
What to do if HeartSine samaritan PAD shows a 'Low battery' warning?
- M
  Manuel AdamsAug 3, 2025
  If your HeartSine Medical Equipment displays a “Low battery” warning, replace the battery as soon as you can. The AED will still work, but it might have fewer than 10 shocks left. Prepare a spare Pad-Pak for quick use and order a new Pad-Pak immediately.
K
Kevin LewisAug 7, 2025
How to fix flashing red status indicator or continual beeping on HeartSine Medical Equipment?
- J
  Jessica BlackburnAug 7, 2025
  First, check the expiration date on your Pad-Pak. If it's expired, replace it right away. If not, turn the HeartSine samaritan PAD on and listen for the voice prompt “Call for medical assistance”. Then, turn the device off again. If the problem persists, contact your Authorised Distributor or HeartSine Technologies immediately.
D
Debra HarrellAug 12, 2025
What to do if HeartSine samaritan PAD says 'Check pads'?
- W
  Wanda WolfeAug 13, 2025
  If the HeartSine Medical Equipment displays a “Check pads” prompt, make sure the pads are fully attached to the patient as shown in the diagram, and that the skin is clean, dry, and hair-free. Readjust the pads if needed. If the message continues, remove and reinsert the Pad-Pak. If the message still appears, use another defibrillator and continue CPR.
C
Christopher EvansAug 18, 2025
Why does my HeartSine samaritan PAD beep three times when turned off?
- H
  hwashingtonAug 18, 2025
  The HeartSine Medical Equipment beeps rapidly three times when turned off or after a weekly self-test because it's outside the specified operating temperature. Return your AED to a temperature between 0°C and 50°C (32°F to 122°F). Then, check if the beeping stops.
R
rwillisAug 23, 2025
What to do if HeartSine samaritan PAD displays a 'Device service required' warning?
- M
  Michelle WalshAug 23, 2025
  If the HeartSine Medical Equipment shows a “Device service required” warning, immediately find an alternative defibrillator. Do not try to fix the device yourself, as it cannot be modified. Contact HeartSine Technologies or your authorized distributor right away.

HeartSine samaritan PAD Specifications

General

Type	Automated External Defibrillator (AED)
IP Rating	IP56
Battery Life	4 years (standby)
Energy	150 J (biphasic)
Operating Temperature	0°C to 50°C (32°F to 122°F)
Waveform	Biphasic
Energy Selection	Automatic
Charge Time	Less than 8 seconds
Voice Prompts	Yes
CPR Coaching	Yes
Battery Type	Lithium Manganese Dioxide (LiMnO2), non-rechargeable
Data Recording	Yes
Relative Humidity	5% to 95% non-condensing
Altitude	Up to 4, 572 m (15, 000 ft)
Pediatric Use	Yes

Related product manuals

HeartSine samaritan PAD SAM 300P

36 pages

HeartSine samaritan SAM 350P

60 pages

HeartSine samaritan PAD - User Manual

Table of Contents

Other manuals for HeartSine samaritan PAD

Questions and Answers

HeartSine samaritan PAD Specifications

Related product manuals