What to do if my heater storm HS-1500-ILO Heater does not blow warm air?
First, check if the air inlet is blocked or if the air filter is dirty and needs cleaning. Second, make sure the ambient temperature isn't higher than the thermostat setting. If neither of these is the issue, unplug the unit from the wall outlet for 2 hours, then plug it back in and operate as normal.
Why doesn’t my heater storm HS-1500-ILO Heater temperature match my central heating thermostat?
Thermostats can vary in their temperature settings. In many instances, your central heating thermostat might not be as accurate as the thermostat on your Heat Storm heater. If you wish, you can calibrate your Heat Storm heater’s thermostat to match your central heating thermostat. Please refer to the “Calibration” section of this manual for guidance.
Why does my heater storm HS-1500-ILO keep blowing air when the leaf symbol is not red or green?
This is the cool down phase. The Heat Storm Heater will run for several minutes to increase its lifespan.
How to understand that my heater storm HS-1500-ILO is working properly if it doesn’t blow any air at first?
The heater is functioning as it should. The first 20 seconds allows the infrared elements to get hot, ensuring that when the fan starts, it will blow warm air into the room.
Overview of the heater's control panel features.
Explanation of the power button functions and modes.
Instructions for adjusting the temperature settings.
General| Model | HS-1500-ILO |
|---|---|
| Type | Infrared Heater |
| Power | 1500 Watts |
| Heating Area | Up to 150 sq. ft. |
| Voltage | 120V |
| Features | Adjustable thermostat |
To Next Page