Heath Zenith Chime Extender SL-6157 User Manual

Chime
Extender
Model SL-6157
Your chime extender includes (Style
of transmitter and chime may vary
from illustration):
• Plug-in doorbell chime
• Extension Transmitter
• Hardware pack
NOTE: You will need to purchase
four AAA batteries for the
transmitter.
To reduce the risk of electrical shock, this
equipment has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a quali-
fied electrician to install the proper outlet.
Do not change the plug in any way.
2. Plug-in the doorbell chime.
1. Set the chime volume on the back of
the plug-in chime, if desired.
Chime
Volume
Control
Access
Door
© 2007 HeathCo LLC 595-5345-07
Figure 1
Your Heath
®
/Zenith Chime Extender al-
lows you to add doorbell coverage to any
room in your house without the need to
run additional wires. The Chime Extender
"listens" for your existing doorbell to ring,
then transmits a radio frequency signal
to the plug-in chme unit in another part
of the house.

Heath Zenith Chime Extender SL-6157 Specifications

General

Type	Chime Extender
Model Number	SL-6157
Chime Sounds	Multiple chime tones
Wireless Range	Up to 100 feet
Compatibility	Compatible with Heath Zenith wireless chime systems