Need help?Do you have a question about the Heathkit GC-1107 and is the answer not in the manual?
General| Brand | Heathkit |
|---|---|
| Model | GC-1107 |
| Category | Alarm Clock |
| Language | English |
Lists various resistor values and their Heath part numbers.
Lists capacitors, diodes, transistors, ICs, and switches.
Lists plastic parts, hardware, and line cord/sleeving.
Lists LDR, transformer, speaker, and printed items.
General guidance for component mounting, soldering, and handling components.
Detailed steps for installing components onto the circuit board.
Configuring 12/24-hour display and installing diodes.
Mounting diodes, capacitors, and transistors on the circuit board.
Mounting integrated circuits and the power transformer.
Preparing the line cord and connecting wires to the circuit board.
Mounting the readout tube, spacer, and line cord.
Instructions for connecting to 120 VAC and 240 VAC power sources.
Inspecting the circuit board for proper assembly and connections.
Installing switches and the speaker into the cabinet bottom.
Connecting circuit board wires to switches and mounting the board.
Attaching the cabinet top, window, and protective insulators.
Using an ohmmeter to check circuit continuity and resistance.
Verifying basic clock functionality and display operation.
Fastening the circuit board and joining the cabinet top and bottom.
Attaching the wood-grain panel, caution label, and feet.
Explains indicators, readouts, and switch functions.
Step-by-step guide for setting the clock's time and alarm.
Initial checks for common assembly and solder issues.
Lists common problems, their causes, and solutions.
Procedures for ordering replacement parts from Heath.
Information on obtaining technical help and repair services.
To Next Page